What did you do to your AT4 today?

I never use them since they are not that accurate where I live and I kept getting flashed since they wouldn't change over fast enough. I'll try them tonight though.
Thank you! I ask because I have the "All Lights" jumper installed from Boost Auto and the fogs only come on when the high beams activate. If you turn them on with the low beams it overrides the Auto High Beam functionality and I've gotten so used to that technology on my vehicles that I'm now too lazy to manually switch back and forth.

First world problems, I know.
 

Took some photos of my progress. I still need to black out the AT4 in the grill, the red hooks and the exhaust tips. I’m still considering whether to level it or not.
 

Attachments

  • IMG_2406.webp
    IMG_2406.webp
    262.5 KB · Views: 48
  • IMG_2402.webp
    IMG_2402.webp
    228.1 KB · Views: 52
  • IMG_2404.webp
    IMG_2404.webp
    394.3 KB · Views: 53
  • IMG_2401.webp
    IMG_2401.webp
    387.7 KB · Views: 53
Took some photos of my progress. I still need to black out the AT4 in the grill, the red hooks and the exhaust tips. I’m still considering whether to level it or not.
Looking great. Are those elevation wheels? Don't forget those exhaust tips.
 

Looks great! How much height did you gain up front? Looks pretty level, did you do anything to the lift in the rear? Any rubbing with your setup?
Smitty, Sorry for late response. I was traveling.

Regarding your question on height gain - With the 285 tires and the leveling kit, it increased the height in the front by ~ 2.5 inches. The air bags in the back picked the rear end up ~ 1/2 inch, so it still had a slight rake to it. But after installing the Diamond Back Cover and putting my tools and other crap in the Cross Bin 8 (Toolbox), plus Hide Away Hitch and Badlands Jack, it brought the back end back down ~ 1/2 inch. (I estimated that to be around 280 lbs of stuff) So, brought the truck back to Total Offroad & More and had them swap out the 2" rear block that comes stock on the 1500 AT4 with a Rouch Country 2.5" Block, and got my 1/2" rake back.

On the rubbing - I have noticed a slight rub when I turn hard in reverse. Will probably grind that flap down just a bid.

I really like the overall look and drive. I think the bronze wheels were a very aggressive move for me, but I probably needed a little break from the norm. Plus, with the popularity of the AT4, I was seeing 4 or 5 each time I left my house, and they all looked the same with exception of color.

Put about 1,000 miles on the Toyo's and some of that was in bad rain. They handled it well.

No regrets with any of my choices so far.
 

Attachments

  • Badlands Jack.webp
    Badlands Jack.webp
    144.1 KB · Views: 30
  • Cross Bin 8.webp
    Cross Bin 8.webp
    54.3 KB · Views: 30
Installed my Chasdis Unlimited-Octane bumper. Pictured with my 285/75r18 wheel & tire combo (came with 265/60r20) (had slight rubbing on the felt but trimming fixed it…no spacers, factory 18” wheels)
Instructions were limited at best…but wasnt to difficult to figure out. Amazed at how many brackets & bolts were removed. Retained the louvers for the ppe intercooler as i dont have a winch installed yet.
 

Attachments

  • IMG_0405.webp
    IMG_0405.webp
    225.3 KB · Views: 46
  • IMG_0404.webp
    IMG_0404.webp
    225.6 KB · Views: 49
  • IMG_0403.webp
    IMG_0403.webp
    315.4 KB · Views: 47
Installed the Road Active Suspension HD leaf spring helpers today on my 2025, 5 minutes for the first side and 3 minutes the second. With offset wheels you can install with them on.

It did raise the rear about 3/4 inch using the white spacer.

My front has been raised 1.5 with Bilstein shocks.

Before (passenger side) and after (drivers side) pics using two same size chemical guys bottles for reference.

536008551_10163595558180786_8626311790419815863_n.webp

IMG_0362.webp

IMG_1110.webp
IMG_0364.webp

IMG_1111.webp
 

Installed the Road Active Suspension HD leaf spring helpers today on my 2025, 5 minutes for the first side and 3 minutes the second. With offset wheels you can install with them on.

It did raise the rear about 3/4 inch using the white spacer.

My front has been raised 1.5 with Bilstein shocks.

Before (passenger side) and after (drivers side) pics using two same size chemical guys bottles for reference.

View attachment 30584
View attachment 30585
View attachment 30586View attachment 30587
View attachment 30588
You'll lovem.
 

New Posts

Most reactions

Back
Top