What's new
By:

Banks iDash

KCAT4X said:
I just installed the banks idash. Nice clean install in my at4x and the color is good.
What fields do you guys display on your idash? Here's what I picked so far but I'm not sure if they all will stay. View attachment 19613View attachment 19612View attachment 19611
Click to expand...
Congrats! The iDash is a great addition.

If you decide you want the pod to match the truck it’s easy to make it match using the paint from Home Depot shown below.

The first picture below shows the contrast between the original Banks-black on the pod, and the AT4X interior color (shown on the insert from the A-pillar).

Some may prefer the contrast between the colors. I offer this in case you’d prefer to have the pod look like it’s part of the truck.
 

AT4 Forum Fav 👍

Ironclad EXO Motor Impact Glove Ironclad EXO Motor Impact Gloves - Grab a set through Amazon!

Attachments

  • IMG_0328.webp
    IMG_0328.webp
    292.2 KB · Views: 154
  • IMG_0332.webp
    IMG_0332.webp
    389.2 KB · Views: 133
  • IMG_0331.webp
    IMG_0331.webp
    485.3 KB · Views: 166
  • IMG_0341.webp
    IMG_0341.webp
    228.1 KB · Views: 120
Just as an FYI for anyone that has the older iDash, Banks recently released the iDash Pro and iDash Pro Data and no longer sells the older iDash models. I reached out to see if the older ones would still be supported and was told this:

Eric with Banks here. We will not be releasing updates for the original iDash (now referred to as iDash "Classic"). However, we have a path to upgrade to the iDash Pro. I sent you a message. Check your message request inbox.

Kinda upsetting since the current bata firmware still doesn't completely work with the 3.0 Duramax 100%. I just picked up a second iDash also to add to my old one. I am hoping they will let me return it. I'll post back when I see what the upgrade path is.
 

Looks like the new one has Bluetooth connectivity and upgraded screen. Sounds like they may offer an inline Bluetooth module so the classic users get the app experience. 🤷
 

Well, dang. Still cannot get my idash (classic) to properly display DPF distance parameter and now they are going to stop development support for it. Mine displays once when it's turned on and then never again until a restart. And, of course no ability to force regen is disappointing.
 

Chrisbert said:
Well, dang. Still cannot get my idash (classic) to properly display DPF distance parameter and now they are going to stop development support for it. Mine displays once when it's turned on and then never again until a restart. And, of course no ability to force regen is disappointing.
Click to expand...
Why can't you do a forced regen? It has 2 options, mobile for when driving and stationary while parked. Works fine on mine.
 

Whaler27 said:
Congrats! The iDash is a great addition.

If you decide you want the pod to match the truck it’s easy to make it match using the paint from Home Depot shown below.

The first picture below shows the contrast between the original Banks-black on the pod, and the AT4X interior color (shown on the insert from the A-pillar).

Some may prefer the contrast between the colors. I offer this in case you’d prefer to have the pod look like it’s part of the truck.
Click to expand...
Just curious which of those 2 colors in the pic you used to get the desired color? Or did you use a combo of both colors?
 

Chrisbert said:
Well, dang. Still cannot get my idash (classic) to properly display DPF distance parameter and now they are going to stop development support for it. Mine displays once when it's turned on and then never again until a restart. And, of course no ability to force regen is disappointing.
Click to expand...
Have you had the recall update performed so the OTA updates are supposed to work again? I had that done and recently many of the old PIDs (like regen distance) that displayed nothing now work again. I have not updated my iDash for at least 6 months and not sure the firmware rev, but things seem to be working again.
 

Gerb4653 said:
Have you had the recall update performed so the OTA updates are supposed to work again? I had that done and recently many of the old PIDs (like regen distance) that displayed nothing now work again. I have not updated my iDash for at least 6 months and not sure the firmware rev, but things seem to be working again.
Click to expand...
I have. I'm on the latest beta firmware, and my vehicle selection is the one way down the list with 2024 L5P in the string.
 

Chrisbert said:
Well, dang. Still cannot get my idash (classic) to properly display DPF distance parameter and now they are going to stop development support for it. Mine displays once when it's turned on and then never again until a restart. And, of course no ability to force regen is disappointing.
Click to expand...
My old 1500 Trail Boss with the 3.0 did the same thing. I haven't gotten around to installing in my Sierra yet but I'll have to test that out.
 

You must log in or register to reply here.

AT4 Forum Fav 👍

Tyger Auto Underseat Storage Box Tyger Auto Underseat Storage Box - Grab one through Amazon!

GMC AT4 Forum Photos

NEW ITEM IN THE SHOP SUN VISOR SAFETY STICKER COVER UPS After market skid plates Guess what I found LETS SEE YOUR AT4 HD! 2024 2500 Mod Progress Diode dynamics SSC1 LED Fog Light Kit for 2022-2024 GMC Sierra 1500 AT4X

GMC AT4 Forum Photos

NEW ITEM IN THE SHOP SUN VISOR SAFETY STICKER COVER UPS After market skid plates Guess what I found LETS SEE YOUR AT4 HD! 2024 2500 Mod Progress

New Posts

Most reactions

Back
Top