Banks iDash

KCAT4X

Member
Joined
Sep 2, 2024
Messages
39
Reaction score
38
Location
NJ
I just installed the banks idash. Nice clean install in my at4x and the color is good.
What fields do you guys display on your idash? Here's what I picked so far but I'm not sure if they all will stay.
20240927_132024.jpg
20240927_132259.jpg
20240927_132303.jpg
 

DEF, DPF %, A second DFP that counts down (forget what it's called) Regen status, Boost, and EGT. Just ordered a Derringer so my layout will be changing.
I’m so jealous of your Derringer! apparently the software for the 2024 L5P won’t allow it and BANKs won’t answer if they’re even trying to work it out.
 

Does anyone have the STL for that gauge pod? I had one that mounted to the air vent in my 22, but Im stuck not wanting to spend $100 for a pod for my 24 lol.
 

Wasn't aware you could display gear! Guess I need to tinker with mine some more!
With the gas engine I dont have a need to display much other than gear so I dont think the idash is a great idea. I wish it could be displayed on the trucks screen. I would think if in the L settings it would show but sadly it only shows the maximum gear allowed by the setting, not the current gear.
 

With the gas engine I dont have a need to display much other than gear so I dont think the idash is a great idea. I wish it could be displayed on the trucks screen. I would think if in the L settings it would show but sadly it only shows the maximum gear allowed by the setting, not the current gear.
Thas pretty useless. Several scanners including iDash etc. are able to display current gear; its only a matter of time before someone builds an OBDII dongle with bluetooth to display that info on an app.
 

Just ordered mine for my AT4x, how was the install? Also will the factory cover go back on after drilling the hole for cable to go through if you remove the gauge?
 

Could not dig up this information but why does iDash not integrate with Carplay?
 

Could not dig up this information but why does iDash not integrate with Carplay?
It could, if Banks created a obd2 tool that worked wireless through apple and then got it approved for carplay. Or AndroidAuto.

But its an OBD2 reader basically. It doesnt broadcast anything.
 

I ended up buying this pod off etsy for 50% off the pricing of the banks one. Was great quality.
Install takes maybe 20min.
Remove 2 bolts under pillar handle covers.
Drill hole in corner of cover, I used a 3/8" drill bit.
Remove side panel on dash.
Run cable up from OBD port.
Reinstall A pillar cover
Mount pod, install bolt, insert gauge.

Quick and easy.

I did make a install video Ill be publishing here shortly.
 

Last edited:
Back
Top