What did you do to your AT4 today?

[Davedough]

Keep us posted. What do you plan on doing with it?

Oh nothing major, just had an idea with the emblems. On my Elevation (current truck that I'm trading), it was the Volcanic Red Tintcoat. I "blacked" out the chrome on the outer ring of the emblems and I really liked the way the red in the GMC played with the red of the paint. So I want to do something similar on my AT4 when it comes, with the grey. A quick (and very messy) photoshop attempt confirmed to me that that's what I want to do.

 

AT4 Forum Fav 👍

Spigen Tempered Glass Screen Protector 23/24 Sierra - Grab one through Amazon!

[pinebaron]

More useless stuff arrived ahead of Comeup Winch installation due tomorrow Recovery strap, gloves and a bag for misc stuff.

 

[Johnv76]

DiamondBack HD tonneau cover, 20% ceramic tint on passenger and drivers front side windows, 20% ceramic tint windshield visor, 6 inch stubby antenna.

 

[pigpen23]

Replaced my mirror caps, the door and tailgate AT4 emblems, and the front GMC emblem.

 

[pinebaron]

DiamondBack HD tonneau cover, 20% ceramic tint on passenger and drivers front side windows, 20% ceramic tint windshield visor, 6 inch stubby antenna.

Love it. I have the same DiamondBack HD tonneau cover except I chose not to have cleats pre-installed from factory but have them as an accessory for when I put an ATV on top. Really solid cover, zero leaks through heavy rains and snow, whatever the PNW and BC throw at it.

 

[Johnv76]

Love it. I have the same DiamondBack HD tonneau cover except I chose not to have cleats pre-installed from factory but have them as an accessory for when I put an ATV on top. Really solid cover, zero leaks through heavy rains and snow, whatever the PNW and BC throw at it.
View attachment 8353

Very nice. Yes this is by far the best tonneau cover. I like the look without the cleats. It looks a lot cleaner.

 

[BCM]

Replaced my mirror caps, the door and tailgate AT4 emblems, and the front GMC emblem.

Would you mind sharing where you got the caps for the tow mirrors? I need to do the same when my truck comes in.

Thanks!

 

[pigpen23]

Would you mind sharing where you got the caps for the tow mirrors? I need to do the same when my truck comes in.

Thanks!

eBay specials. Surprisingly pretty nice quality compared to the OEM caps. I'll PM you since idk if sharing eBay links is allowed.

 

[Leo581]

GM finally had the Rev hard folding tonneau cover back in stock AND 25% off. Easy install. For those wondering, it does block the bed view camera when folded up unfortunately.

 

[pinebaron]

Done: 12500Lb Comeup Winch Installed by the dealer today.
How it looks installed (There is a plate which covers this for the license plate madatory in WA). I need to figure out if I'll use it or risk getting a ticket which won't be good.

Below is the cable control socket and winch on/off switch below passenger side hood right next to the battery. I felt I'd hear the dangling hook rattle, but heard nothing on my drive home from the dealer.

Pic with switch on below

Manual control cable below

Controller

Cable plug end of control cable

Clutch Engage/Disengage lever; pull up and turn 90 degrees to disengage

And then the wireless remote; works independently of the cable

And finallly a tag which was dangling from the hook

With the plate covering the winch/hook

 

[pinebaron]

With licence plate in place covering winch and hook. I may just not use it

 

[pinebaron]

After above winch install they installed a set of new rear leaf spring packs; I could hear clicks and groans before; all gone now; I'm a happy camper
Link to a few random pics after install

 

[gemarsh]

With licence plate in place covering winch and hook. I may just not use it
View attachment 8414

What does it look like using the bottom holes of the license plate?

I know there are flip-up mounts available.

Or run your hook to a clevis mounted to the tow hook.

 

[gemarsh]

With licence plate in place covering winch and hook. I may just not use it
View attachment 8414

It's fun playing with others money.

Most have a standard bolt pattern, you'll have to measure, but something like this would help with the look...

https://www.amazon.com/Keazet-Towing-Winch-Fairlead-Hawse/dp/B0CLXXX48V/ref=sims_dp_m_dex_popular_subs_mobile_t3_v3_m_sccl_1/130-9037201-5024935?pd_rd_w=LeEul&content-id=amzn1.sym.0d05ffc2-8fac-41a1-9066-6b65210aa843&pf_rd_p=0d05ffc2-8fac-41a1-9066-6b65210aa843&pf_rd_r=90TNRSMX9EEKF0JAGW0Q&pd_rd_wg=dUvP5&pd_rd_r=cbdda84b-bbac-4a80-aa97-da50f522cc0b&pd_rd_i=B0CLXXX48V&psc=1

 

[pinebaron]

What does it look like using the bottom holes of the license plate?
I know there are flip-up mounts available.

Or run your hook to a clevis mounted to the tow hook.

License plate may look odd with it sticking up over the bumper.
I like the idea of a flip mount or a clevis hook; TBD. Lets see what Whaler does.