285/70r18s Nitto Ridge Grapplers?

[Rambo Crane]

Following up on 285/75r18's on factory wheels / factory suspension. Really interested to see if this will work. Seems like great size w/out lift if possible.

 

AT4 Forum Fav 👍

VIAIR 400P/40045 Automatic Portable Compressor 150 PSI/2.30 CFM - Grab one through Amazon!

[ShortMag]

Just speculating but I think you’d be fine

My 2019 AT4 has 295/70r18 recon grapplers and I’ve had no issues with them. Truck and wheels are stock

 

[d1rty]

I'm considering 285/75-17 as well, and from my research, it seems that if you're running OEM wheels with +24 or +28 offset, you're good. Once you start getting to 0 or negative offset, that's where you start to get rub.

No first hand experience yet, just based on what I've seen/read online.

 

[Quik]

2024 AT4X and just switched the OEM Goodyears for a set of Ridge Grapplers 285/70/18 on stock wheels and I like these tires so much better.

 

[Bobojo1]

2024 AT4X and just switched the OEM Goodyears for a set of Ridge Grapplers 285/70/18 on stock wheels and I like these tires so much better.View attachment 8118

What brand fender flair and mudflap delete?

 

[Quik]

What brand fender flair and mudflap delete?

It's all stock, did not cut or remove anything

 

[Bobojo1]

Oh, I see now. Didn't see AT4X….

 

[ShortMag]

2024 AT4X and just switched the OEM Goodyears for a set of Ridge Grapplers 285/70/18 on stock wheels and I like these tires so much better.View attachment 8118

Love it. How much room you got? Hoping to do 295/70r18 like I have on my 2019 at4

 

[Quik]

Love it. How much room you got? Hoping to do 295/70r18 like I have on my 2019 at4

Room seems ok as far as I can tell, no rubbing at full lock or anything. I wanted to go 295 but have seen mixed reviews, some say they will fit, others say it rubs a little so I just played it safe with the 285's

 

[Wakinvol]

Room seems ok as far as I can tell, no rubbing at full lock or anything. I wanted to go 295 but have seen mixed reviews, some say they will fit, others say it rubs a little so I just played it safe with the 285's

Maybe post a pic of the whole truck. . Gives a better perspective.

 

[ShortMag]

Picked this one up monday
295/70R18 with room to spare

 

[Quik]

Picked this one up monday
295/70R18 with room to spare

View attachment 8264

Did you get your speed/odometer re calibrated? I think I'm gonna take mine in to get it done.

 

[ShortMag]

Did you get your speed/odometer re calibrated? I think I'm gonna take mine in to get it done.

No I didn’t and won’t.

I haven’t looked at the speedo on the highway while holding a gps, but I don’t think it’s more than a couple mph off if the truck is calibrated properly to the stock tires

Heck I came from an AT4 where the speedo was off 5 mph at 67 mph I just mentally knew that was the case and drove accordingly. Never an issue

 

[Quik]

No I didn’t and won’t.

I haven’t looked at the speedo on the highway while holding a gps, but I don’t think it’s more than a couple mph off if the truck is calibrated properly to the stock tires

Heck I came from an AT4 where the speedo was off 5 mph at 67 mph I just mentally knew that was the case and drove accordingly. Never an issue

Mine is 2-3 mph off with the 285/70's I just installed. I'm more concerned with the odometer vs the speedo. Not a huge deal but I do like it to be right, especially given the cost of this truck.

 

[Rambo Crane]

285/70 Nitto Ridge Grapplers. So far so good. Fuel milage is hanging out around 23.5ish on interstate, fingers crossed mileage only goes up w/ additional miles.