2023 GMC Sierra 1500 AT4x AEV Build

[Johnv76]

Diode Dynamics fog light kit.View attachment 20474

 

AT4 Forum Fav 👍

VIAIR 400P/40045 Automatic Portable Compressor 150 PSI/2.30 CFM - Grab one through Amazon!

[Johnv76]

Those backup lights are awesome. Maybe i will switch to those from the VLED plate light so i can go back to putting a cover over my plate

They are extremely bright. Baja Design really makes awesome lights.

 

[Johnv76]

Behind the grill custom mounted 30inch light bar.

 

[Johnv76]

Behind the grill custom mounted 30inch light bar.View attachment 20502

 

[Johnv76]

View attachment 20445
Rough County 8 gang switch

Think Rough Country and Auxbeam have a partnership thing going. That looks a lot like the Auxbeam 8 gain switch panel. Nice setup bud.

 

[Johnv76]

Few upcoming upgrades, 285/75 R18 Nitto Ridge Grapplers, should be comparable to a 35 11.5. Either a ViAir or ARB air compressor with tank, and a pressure control module for my air springs. Peak Suspension UCA with tie rode sleeves, and sway bar mount.

 

[Johnv76]

589 Fab rear shock mount skid plates.

 

[Johnv76]

View attachment 20453
Morimoto XBT Rock Lights 6 - 1 each fender and 2 underneath

Been thinking about getting the Diode Dynamic rock light kit for mine. Looks awesome bud.

 

[pinebaron]

Those backup lights are awesome. Maybe i will switch to those from the VLED plate light so i can go back to putting a cover over my plate

Amber instead.

 

[Johnv76]

Amber instead.
View attachment 20539

The amber looks good bud.

 

[Ctmedic]

Diode Dynamics fog light kit.View attachment 20474

Are these worth it ? I’m thinking of getting them

 

[Johnv76]

Are these worth it ? I’m thinking of getting them

Yes, you can read my review of them here.

Useless Fog Lights

Just a heads up, Diode Dynamics just released a new product for out AT4x trucks. Just put my order in. https://www.diodedynamics.com/ssc1-led-fog-light-kit-for-2022-2024-gmc-sierra-1500-at4x.html

www.at4forum.com

 

[Blizzy]

Badges Hyper dipped bronze, and Sierra logo removedView attachment 20355 Hyper dipped bronze, and Sierra logo removed

Do you have a write up or anything on how you did these?

 

[Johnv76]

Do you have a write up or anything on how you did these?

All I did was tape up the surrounding area around the badges to prevent over spray. Then start by doing a light coat for the first three coats. Then a medium coat for the next two. After that do 2 heavy coats. Letting each coat dry in between. Once dry, peel away the extra hyper dipped from the areas you do want it. It should peel away fairly easy. Nice thing is if you mess up, peel it all off and redo it again.

 

[TFCL-3]

For those of you that have a Sierra 1500 AT4, AT4x here is a series of upgrades, and ideas for our trucks. If anyone has any questions please let me know on the stuff i have done up to this point.

Great mods!