What did you do to your AT4 today?

[Cocoabean]

I just installed the exact same tires and wheels on my 2022 AT4 but they rub like crazy! I notice you removed the mudflaps from your truck. Where did you get the mudflap delete kit? Do your tires fub on the fender liner? If so what did you do the fix that?

I have a 2" leveling kit on my truck as well. This is required in order to get the tires to fit.

There are mudflap delete kits you can get to remove the mudflaps completely. You really just need to delete the front mudflaps, but there are lots of options if you want to delete more: https://www.sharptruck.com/truck-hardware-finishing-caps

I didn't remove the mudflaps though. I just removed the bracket behind the mudflaps to pull the mudflaps back a few inches. This plus some trimming worked for me. Here is a good video on the bracket removal:

My tires don't rub the fender liner, so I didn't mod anything for this.

 

AT4 Forum Fav 👍

Safe Jack 6 ton Starter Bottle Jack Recovery Kit - Grab one through Amazon!

[kkohne10]

Got the boat hooked up and ready for summer! View attachment 3824

What tint you running?

 

[kkohne10]

I ordered a harness for the sub amp. https://soundsgoodstereo.com/produc...-2023-gmc-sierra-chevrolet-silverado-vehicles

Would be interested to hear what sub set up you pair with this harness. Would like to add a powered unit in combo with a harness like this. Does it allow the bose sub to stay active and add the aux sub?

 

[Snowstormer]

Had to repair my fence so I used it like a truck should be! ....now my MDX just couldn't do this....love the tailgate!

 

[FLBeachyAT4]

Would be interested to hear what sub set up you pair with this harness. Would like to add a powered unit in combo with a harness like this. Does it allow the bose sub to stay active and add the aux sub?

I like Skar subwoofers; they have an outstanding warranty and are local to Florida. I'm using a 10" SVR-D2 @ 1 ohm with Rockford R1200-1D. The stock sub will stay for now. If I ever get my harness from @SoundsGoodStereo I let you know. So far @SoundsGoodStereo is a horrible company, and they suck monkey balls ordered the harness two weeks ago, and they haven't responded to any emails on the status. I'm about to dispute the charge and order from https://lljcustoms.com/products/2013-2024-gm-bose-t-harness-r2g

 

[Snag11x]

1. Changed Black/Chrome emblems to all black - front and back - (like the all black much better)
2. Dropped off fender flares at paint shop, should have them back next week.
3. Installed GMC valve stems on new wheels
4. Got TPMS tool from amazon to try to correct the TPMS error readings, working on that tomorrow.

Where did you get the all black gmc logos? Looks great

 

[Snowstormer]

Where did you get the all black gmc logos? Looks great

Got the AT4x/Sierra emblems from GM: https://www.thepartsolution.com/oem...iw2XQEBYf9cw8SW-_hlCNEyE6mgpX6yEaAm-5EALw_wcB

Got the all black "GMC"from Ebay: seller capsbay2...

I do have some tips/tricks if you need them on how to the install properly because they can be a a little tricky

 

[slythetove]

I like Skar subwoofers; they have an outstanding warranty and are local to Florida. I'm using a 10" SVR-D2 @ 1 ohm with Rockford R1200-1D. The stock sub will stay for now. If I ever get my harness from @SoundsGoodStereo I let you know. So far @SoundsGoodStereo is a horrible company, and they suck monkey balls ordered the harness two weeks ago, and they haven't responded to any emails on the status. I'm about to dispute the charge and order from https://lljcustoms.com/products/2013-2024-gm-bose-t-harness-r2g

Interested how this plays out - I was looking at the soundsgood for just subs as well...

 

[FLBeachyAT4]

Interested how this plays out - I was looking at the soundsgood for just subs as well...

Harness finally shipped. I’ll keep thread posted on my install this week. I also ordered the Skar box that fits our trucks.

 

[22AT4]

Need pics of the starlight interior!

Here are a few, comes with app to change twinkle speed, meteors, all different colors and brightness. Very cool addition

 

[Griss010]

Driving to Arkansas tomorrow to get my 23 AT4 3.0!

Several plans in the works:
Tint windows
Black out emblems
Blackout exhaust tips
RC AL2 drop steps
Bilstein 5100s all around (1.1 setting in front)
Cognito UCAs
New wheels and tires

Plan to do the Mud Flap mod to make room for bigger tires. Maybe that will help me figure out what size tires I want to go with.

 

[Griss010]

Picked up truck from shop and added following to 2023 AT4X:

- leveling kit w/ new UCA
- 295/60r20 Toyo RT Trail
- 20x9 +1 Fuel Blitz
- Back Flip Tonneau
- tinted front to match rear
- blacked out badges and emblems (need front still as the illuminated ones don’t fit the new grill with the AEV bumper). Will find another option

Made a huge difference and happy with look so far. A few more to come in the following weeks

Good looking truck. What kind of room do you have at UCAs with that tire and offset?

 

[Bishop]

Y'all are gonna be super jealous, but yesterday I did the first thing everyone on this forum wants to do with a two week old AT4 with less than 200 miles on it . . . I took it in for $3k of PDR work for hail repair!

A week after getting the damn thing a big ass hail storm came through and dimpled me up while I looked on aghast.

 

[flcmcya]

Just made room in my garage.... for that reason.

 

[Bishop]

Welp, got the repair estimate in finally (insurance took forever to get it to me), and the bill is coming in at almost $3700. Luckily we just have the deductibles for each vehicle, and our agent thinks that both may be covered by the home owners deductible since we're likely to have some roof work done as well (roof adjuster comes Monday).

But damn. Poor fella was brand new. I don't want him to be afraid of his new home now and develop Post Traumatic Truck Disorder. He deserves a safe space, but he doesn't fit in our garage, grrrrrr.

The good news is that the shop has been working on it since Wednesday and says I should be able to pick it up tomorrow morning. Hopefully you'll never even be able to tell. Fingers crossed!