Auxiliary lighting switches

[Sperle]

I have the 8 switch aux and mounted mine close to what johnv did also

 

AT4 Forum Fav 👍

American Flag Metal Trailer Hitch Cover - Grab one through Amazon!

[Ctmedic]

I have the 8 gang from rough country.

 

[pinebaron]

Do any of these have carplay interface? I know the Garmin one does.

 

[REV_THS]

I have the 8 gang from rough country. View attachment 25084

I’m assuming your vehicle is a 1500?

 

[xOperator]

Anyone using the AuxBeam switch panel setup, is your truck a 1500 or 2500? I’m looking to see which battery you used on a 2500 annd how you hooked it up and where you mounted the Auxbeam fuse panel.

I don't have an Auxbeam, but I connected my wiring to the auxiliary battery

 

[Amateurhour]

1500 here, I also mounted my auxbeam controller in the dead space between the fender and the body structure on the passenger side. It’s adjacent to the factory fuse box and the wires come up from below for a clean look.

For anyone looking at the switch pros, SDHQ makes a cowl mount that I think looks pretty clean: https://sdhqoffroad.com/products/19...ower-module-mount?_pos=4&_fid=6a188a040&_ss=c

 

[Amateurhour]

Do any of these have carplay interface? I know the Garmin one does.

The garmin is the only one that I know for sure. Switch Pros and SPod have apps that they say can be used for controlling but I haven’t used them and dunno if it works on carplay.

My auxbeam has bluetooth and an app, but that’s just to configure the control panel.

 

[REV_THS]

I don't have an Auxbeam, but I connected my wiring to the auxiliary battery

Is that all mounted on your fuse box?

 

[REV_THS]

1500 here, I also mounted my auxbeam controller in the dead space between the fender and the body structure on the passenger side. It’s adjacent to the factory fuse box and the wires come up from below for a clean look.View attachment 25102

For anyone looking at the switch pros, SDHQ makes a cowl mount that I think looks pretty clean: https://sdhqoffroad.com/products/19...ower-module-mount?_pos=4&_fid=6a188a040&_ss=c

How did you bolt it inside that fender? Rivenut?

 

[xOperator]

Is that all mounted on your fuse box?

yes, not mechanically attached, used some 3m high-strength tape

 

[Amateurhour]

How did you bolt it inside that fender? Rivenut?

Yep, technically plusnuts. Access is decent with the fender liner removed.

 

[gemarsh]

Yep, technically plusnuts. Access is decent with the fender liner removed.

Yeah, I feel plusnuts are better for thinner sheetmetal.

 

[Joedert]

I got the OE upfitter switches installed in 2025 AT4x. Clean but are the switches live and how does one access the wires to connect devises?

Do you have a pic where they are at on the dash? I have a 24 AT4 and was told that I would have to cut out my dash somewhere to mount the switches.

 

[gemarsh]

Do you have a pic where they are at on the dash? I have a 24 AT4 and was told that I would have to cut out my dash somewhere to mount the switches.

@NHAT4SFD has them installed...

 

[gemarsh]

Do you have a pic where they are at on the dash? I have a 24 AT4 and was told that I would have to cut out my dash somewhere to mount the switches.

Here is the kit...

2024-2025 GMC Sierra AT4 Denali HD Upfitter Auxiliary Switches

Factory-style upfitter switch kit for 2024–2025 GMC Sierra HD AT4, AT4X, Denali & Denali Ultimate. Includes genuine GM parts, fuse block, and no programming needed.

404parts.com