AEV clearance kit with 35s

[Glane]

Thanks for your post. I have been looking into this as well! I just got the AT4X standard package and was looking at purchasing the Salta Wheels, or something with a positive offset. I’m trying to run 35 12.50 R17 Toyo RT trails with as little poke as possible. Obviously clearing the control arm is the biggest issue. I have been looking at going with a kit from Peak Suspention but I have not pulled the trigger yet.

Are your wheels the stock AEV wheels with the 26mm offset? Did you do the entire kit yourself? What did you use to prop the truck?

I also have a AT4X

 

AT4 Forum Fav 👍

LT285/60R20 125/122Q E/10 NITTO RIDGE GRAPPLER - Grab a set through Amazon!

[Glane]

I am curious if the AEV 35-in Tire clearance package works on a stock 2026 1500 Diesel at4x with stock rims. What else should be done and what else needs to be done for correct operation. If I have to change out to AEV rims exclusively so be it but I sure would like to be able to use my stock rims and put dedicated winter tires on the GMC stock rims either stock tire size or 35s as I did with my second gen Raptor.

 

[lostaddiction]

The AEV kit will work on a normal truck but the inner fender liner cutout on the front of the tire is meant for the AEV bumper. The rest will bolt right up.