1500 AT4s. Lets see them!

I also have 285/70R18s on mine, toyo at3s on the stock wheels powder coated satin black. I didn't have the truck long before I swapped but i'd say its a 2-3 mpg hit from the stock territory MTs. Much more quiet ride though and I still get 22-23mpg back and forth to work with the LZ0 on mostly backroads, getting around 15mpg pulling a 4.5k lb boat. Didn't notice any different throttle response between the tires.
View attachment 3537
View attachment 3538
View attachment 3539
What kind of clearance do you have between the tire and the upper control arm?
 

I really like the look of the light bar, how much of a pain was it to install?
very easy. 3M tape for the holsters which the bar snaps right into. The wiring was a little tricky at first, but then realized I was missing the harness so I had to order that ($75). There are multiple videos on YouTube which do great showing step by step instructions for everything needed including tailgate removal (DonsLife was best to watch).. All in all, took me around an hour to install and secure wiring.
 

Here she is. New FUEL REBAR 20X9 with a +1 offset. Sitting on toyo 305/55/20. Hope to get better pictures once shes cleaned up.
 

Attachments

  • MicrosoftTeams-image (19).webp
    MicrosoftTeams-image (19).webp
    318.7 KB · Views: 445
Hello, could you let me know the size rims and tires you went with? Any offset? I've had company vehicles since I've been in the workforce and this is my first go around with customizing anything. Thanks, you're truck looks great.
I did the same thing on my 2022 AT4 w/factory lift, got rid of the 20" wheels and went with 17x8.5 Black Wheel Icon Alloys Compression 6x5.5 0, 35X12.50R17LT Toyo Tires Open Country A/T III All Terrain 35/12.5/17 Tires BUT I had to do a lot of trimming and I still have a little rub when I make a right turn up a driveway or something similar. I'm going to install Bilstein shocks to see if the 1" lift will stop the little rub.
 

Attachments

  • 20230712_110654.webp
    20230712_110654.webp
    226.3 KB · Views: 267
  • 1000000808.webp
    1000000808.webp
    58.7 KB · Views: 324
  • 1000000807.webp
    1000000807.webp
    93.1 KB · Views: 311
Last edited:
Have had it less than a week, so far the only add ons I'm ordering are, the off-road steps, illuminated emblems, the trifold hard cover and was thinking to do a cold air intake and fatback borla exhaust. Any suggestions on which intake, if any I should be installing?
 

Attachments

  • 20230601_102415.webp
    20230601_102415.webp
    296.3 KB · Views: 310
  • 20230601_170001.webp
    20230601_170001.webp
    358.1 KB · Views: 257
  • 20230601_170026.webp
    20230601_170026.webp
    557.2 KB · Views: 257
See signature for mods
 

Attachments

  • 20230617_063245.webp
    20230617_063245.webp
    342.7 KB · Views: 357
  • 20230617_063237.webp
    20230617_063237.webp
    458.1 KB · Views: 351
  • 20230607_204608.webp
    20230607_204608.webp
    241.9 KB · Views: 375
  • 20230508_170646.webp
    20230508_170646.webp
    105.3 KB · Views: 410
  • 20230504_183153.webp
    20230504_183153.webp
    171.4 KB · Views: 400
  • 20230504_183232 copy.webp
    20230504_183232 copy.webp
    139.6 KB · Views: 406
Just got mine back. Readylift with 5100's, DDT's and the 275/60/20 Falkens.
Killer ride with no rubbing!


20230607_120916.jpg


20230616_070109.jpg


IMG_3500.jpg




 

Last edited:
Back
Top