What did you do to your AT4 today?

[mrgoodwords]

Gentle heat from a heat gun and then a little work with a plastic razor blade to get an edge started, then I just pulled it off. This time of year a couple hours in the sun and it should peel easily — no need for a hair dryer or heat gun.

Thanks. I just went out and peeled a little bit off with my fingernail and it pulled right off in one piece without any effort at all. It literally took me under a minute and this is the result

 

AT4 Forum Fav 👍

Rhino USA D Ring Shackle 41,850lb Break Strength - Grab one through Amazon!

[mrgoodwords]

Finally got the ready lift 2022+ At4x level kit in with 285/75s. Also added Baja SAE lights with separate switch. Turned out nice

View attachment 4914View attachment 4915View attachment 4916

Looks great . Can you share wheel specifics? Are sitting on 20's?

 

[Johnv76]

Looks great . Can you share wheel specifics? Are sitting on 20's?

He's running the stock 18's it looks like.

 

[gemarsh]

Paid truck off!

Hope it won't be the last 2.19% interest loan I will see.

 

[Bluejays]

First time forum user and just purchased a 2022 AT4 last Saturday. First, I am looking for help or thoughts on should I just do a muffler up grade( borla s-type or attack) not sure which one or a flowmaster 10? Been watching sound clips and still not sure. Second , or should I look at doing a cat back system instead?

I am not looking for super loud at all and for sure no Droning in the cab, just good sounds that will not wake up the neighbors. Looking forward to learning more about options everyone has done.

Hi MJ1986
I've just recently installed a Borla catback Atak system @ home. ( No lifts ... ) It literally took me 3 hrs plus to do the whole job. 2 + hrs to take off the shock exhaust and less an hour to install the new system.
And after 3 weeks of ownership, I absolutely love it.
Hope that helps

 

[gemarsh]

Hi MJ1986
I've just recently installed a Borla catback Atak system @ home. ( No lifts ... ) It literally took me 3 hrs plus to do the whole job. 2 + hrs to take off the shock exhaust and less an hour to install the new system.
And after 3 weeks of ownership, I absolutely love it.
Hope that helps

Welcome.

 

[Erik Z]

Fresh out of the shop…BDS 2.5 w/ Toyo 35x11.5 and Raceline 20” wheels

 

[Johnv76]

Any rubbing?

 

[Erik Z]

Any rubbing?

None but we removed the splash guards. I’m going to try to put them back on this weekend.

 

[Erik Z]

BDS2.5
Raceline Avenger 20x9 (+omm)
Toyo Open Country RT Trail 35x11.5/20

 

[Johnv76]

She looks good bud

 

[Johnv76]

Installed my Midland MXT275 MicroMobile GMRS 2-Way Radio. Bed cover Rough Country 6inch LED lights wired up.

 

[Rdf0004]

-295/65R20 Ridge Grapplers (35x11.50 equivalent)
-1.75” Readylift Leveling Kit with UCAs
-Factory Wheels with 1/4” spacer

No rubbing anywhere except in full right lock reverse. Will add mud flap delete at first tire rotate but not necessary just a preference.

Tires are 35.1” tall and 11.6” wide (have a little block that says 35x11.50 on them actually).

 

[gemarsh]

-295/65R20 Ridge Grapplers (35x11.50 equivalent)
-1.75” Readylift Leveling Kit with UCAs
-Factory Wheels with 1/4” spacer

No rubbing anywhere except in full right lock reverse. Will add mud flap delete at first tire rotate but not necessary just a preference.

Tires are 35.1” tall and 11.6” wide (have a little block that says 35x11.50 on them actually).

Welcome. Thanks for the pictures!

 

[funnelcake]

Lot's of nice rides on this thread. First post. Just had a BDS lift and new wheels & tires installed. Rides great. Much better than the leveling kit I previously had.