What did you do to your AT4 today?

If you're looking for SAE rated warning lighting, consider the Whelen T-Ion's (Joe's amazon ones are Chinese knockoffs of these). Sound off mPower LEDs are also great. You're going to spend 10x the cost of the Amazon ones, but they are 10x the quality.
Yeah, they are kinda dim, but at some point, I will look at upgrading to something better/$$$
 

A little before and after. Used a 2x12 to make a little shelf over the wheel well to store my sand bags, tire chains, tie downs, and snow brush. I'll eventually paint it black but pretty happy with how the $20 project turned out.
With a couple of L brackets and toggle bolts, you can bolt it with the three oval holes in the side of the bed and loose the ratchet strap.
 

Had a leftover 1 gallon air tank from an old compressor I wasn't using. So I welded up some mounting legs, loaded the spray gun and gave it some color. Haven't decided on a defiinite mounting location yet, but I'm thinking in the bed somewhere up out of the way. I went back and forth on red or black, but I figure if it's red (also matching the other red at4 accessories), I wouldn't be as apt to run something into it in the bed of the truck. Ideally, I would mount it underneath somewhere, but we get so much snow and salt that I can't see that as a viable option. After I get it mounted, I'll start running lines from my compressor for the tank and airbags.
1738159538124.webp

1738159571214.webp
 

Pod holes + Baja Designs - installed in 17 degrees F, all the prep and attachments were done indoors heh.

These turn on when hitting the button to turn on the bed/utility light in the cab. They also light up when using remote start for a short period. They don't automatically turn on when in reverse.
 

Attachments

  • Image_20250129_102126_332.webp
    Image_20250129_102126_332.webp
    180.7 KB · Views: 46
  • Image_20250129_102126_385.webp
    Image_20250129_102126_385.webp
    160.4 KB · Views: 45
Finally over 50 degrees today, put on my Etsy Gloss black emblems. Fit right over the factory ones like a glove.
Even the wife said they look awesome and she never like mods.LOL

Cheers
 

Attachments

  • IMG_0358.webp
    IMG_0358.webp
    349.8 KB · Views: 39
  • IMG_0357.webp
    IMG_0357.webp
    201.2 KB · Views: 39
Pod holes + Baja Designs - installed in 17 degrees F, all the prep and attachments were done indoors heh.

These turn on when hitting the button to turn on the bed/utility light in the cab. They also light up when using remote start for a short period. They don't automatically turn on when in reverse.
You could make them activate with the reverse lights using this wiring harness, which is what I'm using.

 

You could make them activate with the reverse lights using this wiring harness, which is what I'm using.

It’s even easier than that, the pod holes harness already Ts off the trailer harness for power and ground, you’d just have to tap the reverse wire for the trigger. But then you wouldn’t be able to use them as work lights without doing a little more wiring.
 

New to the group. Wanted to say hello. Picked my AT4X AEV Duramax in Thunderstorm Grey on Monday. Today I got the front 2x windows tinted with visor strip and received a tracking number for my BakFlip MX4 bed cover.

Possibly looking to procure the 4x rocker steps for this truck. Or the high clearance GM steps. Much appreciated if anyone can help. I'll supply the FedEx label.

Gonna DIY a ceramic coating once the weather gets a little better down here in South Carolina.
 

Attachments

  • PXL_20250127_223231999.MP.webp
    PXL_20250127_223231999.MP.webp
    396.7 KB · Views: 44
New to the group. Wanted to say hello. Picked my AT4X AEV Duramax in Thunderstorm Grey on Monday. Today I got the front 2x windows tinted with visor strip and received a tracking number for my BakFlip MX4 bed cover.

Possibly looking to procure the 4x rocker steps for this truck. Or the high clearance GM steps. Much appreciated if anyone can help. I'll supply the FedEx label.

Gonna DIY a ceramic coating once the weather gets a little better down here in South Carolina.
Welcome.

Thanks for the picture!
 

New to the group. Wanted to say hello. Picked my AT4X AEV Duramax in Thunderstorm Grey on Monday. Today I got the front 2x windows tinted with visor strip and received a tracking number for my BakFlip MX4 bed cover.

Possibly looking to procure the 4x rocker steps for this truck. Or the high clearance GM steps. Much appreciated if anyone can help. I'll supply the FedEx label.

Gonna DIY a ceramic coating once the weather gets a little better down here in South Carolina.
Nice rig, congratulations
 

Had a leftover 1 gallon air tank from an old compressor I wasn't using. So I welded up some mounting legs, loaded the spray gun and gave it some color. Haven't decided on a defiinite mounting location yet, but I'm thinking in the bed somewhere up out of the way. I went back and forth on red or black, but I figure if it's red (also matching the other red at4 accessories), I wouldn't be as apt to run something into it in the bed of the truck. Ideally, I would mount it underneath somewhere, but we get so much snow and salt that I can't see that as a viable option. After I get it mounted, I'll start running lines from my compressor for the tank and airbags.
View attachment 24801
View attachment 24802
Very nice indeed! Beautiful job!
 

New to the group. Wanted to say hello. Picked my AT4X AEV Duramax in Thunderstorm Grey on Monday. Today I got the front 2x windows tinted with visor strip and received a tracking number for my BakFlip MX4 bed cover.

Possibly looking to procure the 4x rocker steps for this truck. Or the high clearance GM steps. Much appreciated if anyone can help. I'll supply the FedEx label.

Gonna DIY a ceramic coating once the weather gets a little better down here in South Carolina.
Congratulations and Welcome!
 

Pod holes + Baja Designs - installed in 17 degrees F, all the prep and attachments were done indoors heh.

These turn on when hitting the button to turn on the bed/utility light in the cab. They also light up when using remote start for a short period. They don't automatically turn on when in reverse.
I have these they work great. They also light up when you unlock the truck with the rest of the lights. Nice when your in a dark parking lot
 

Pod holes + Baja Designs - installed in 17 degrees F, all the prep and attachments were done indoors heh.

These turn on when hitting the button to turn on the bed/utility light in the cab. They also light up when using remote start for a short period. They don't automatically turn on when in reverse.
Very neat indeed!
 

Back
Top