***New Product*** Overland Defense AEV Fog Light Mounts

[DASSCRUB]

The tabs on the backside of the 3d printed mount doesn't have any clips to secure in place on to the bumper. Did you use something to ensure the ride wont eventually wiggle the bracket out?

 

AT4 Forum Fav 👍

Ironclad EXO Motor Impact Gloves - Grab a set through Amazon!

[Sperle]

The tabs on the backside of the 3d printed mount doesn't have any clips to secure in place on to the bumper. Did you use something to ensure the ride wont eventually wiggle the bracket out?

i took the clips from the cover i removed and reused them if that helps.

 

[DASSCRUB]

i took the clips from the cover i removed and reused them if that helps.

worked perfect tyvm!

 

[Redleg_155]

Looks like they may have taken the product down. You may want to email them to see.

I have my set. This thread has helped me but could use the dummy version. I assembled mine fins down and swapping the bezel around, transferred clips, used a pry tool to remove old panels. But now I'm stuck on how to route the wire. There is a small hole in the pocket. Do I run through there and across to my switch box? Should I drop my front skid plate for wiring?

 

[gemarsh]

I have my set. This thread has helped me but could use the dummy version. I assembled mine fins down and swapping the bezel around, transferred clips, used a pry tool to remove old panels. But now I'm stuck on how to route the wire. There is a small hole in the pocket. Do I run through there and across to my switch box? Should I drop my front skid plate for wiring?

Welcome.

 

[Johnv76]

They are currently developing ones for the 2500 AEV front bumper. They are on pre-order now.

 

[Johnv76]

I have my set. This thread has helped me but could use the dummy version. I assembled mine fins down and swapping the bezel around, transferred clips, used a pry tool to remove old panels. But now I'm stuck on how to route the wire. There is a small hole in the pocket. Do I run through there and across to my switch box? Should I drop my front skid plate for wiring?

Nice, I really like the white Baja Design lights. Its different, and stands out. Nice job.

 

[Sperle]

I have my set. This thread has helped me but could use the dummy version. I assembled mine fins down and swapping the bezel around, transferred clips, used a pry tool to remove old panels. But now I'm stuck on how to route the wire. There is a small hole in the pocket. Do I run through there and across to my switch box? Should I drop my front skid plate for wiring?

I found it easier to pull and mess with the wires with the skid plate off. It’s just a couple bolts and not that heavy. Once the skid plate is down you will see a couple easy paths along the inner side of the bumper.

 

[Redleg_155]

I found it easier to pull and mess with the wires with the skid plate off. It’s just a couple bolts and not that heavy. Once the skid plate is down you will see a couple easy paths along the inner side of the bumper.

Its supposed to be in the 50's today I will give that a shot. Thanks for the help.

 

[Redleg_155]

I have my set. This thread has helped me but could use the dummy version. I assembled mine fins down and swapping the bezel around, transferred clips, used a pry tool to remove old panels. But now I'm stuck on how to route the wire. There is a small hole in the pocket. Do I run through there and across to my switch box? Should I drop my front skid plate for wiring?

Installed. I went white to match my theme. I'll probably order the amber cover to let me run both colors