Hi from WillyR1er!

[willyR1er]

Had some leftover material figured I just carry it to the back of the truck to get the multi pro tailgate section too.

 

AT4 Forum Fav 👍

Sellars Toolbox Shop Towels Dispenser Bucket - Grab one through Amazon!

[Cwales]

@BarE is running 35s on a 2 inch level and reports no rubbing.

"I decided against the reverse level. Went with 2" more in the front and Nitto Ridge Grapplers 35x11.5x20 on the stock 20" rims. Measuring 41 1/4" to fenderwell front and rear. Just picked it up this afternoon. More to come on mileage impact."

"Rough country 2" additional installed by dealer and was told that would not void warranty. Regular driving, speed bumps, driveways, full turn - no rubbing. I am taking it to our farm over the 4th weekend and will put it through the "ditch" test to check the clearances under suspension compression."


View attachment 464

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

Great looking truck. Did you not install new UCA’s with the rough country? I like the price of just the level, but I keep hearing issues on the UCA later.

 

[Maduro8]

Just thought I would post up some pictures. Have a 2021 1500 6.2. Just sitting under 4K.
Things done:
Pulsar LT
Rolling bed cover
AMP power steps
Custom 12” sub box and storage bin rear seat
Tailgate badge delete “gmc” and “Sierra “
Black matte hood accent graphic

Things wanting to do:
33” Nitto Ridge Grapplers
Finish black matte graphics for tailgate
Figure out graphics for top edge for bed sides, more of a protective vinyl, thinking of just doing a gloss black or clear
ProCharger supercharger, need to wait until I am out of warranty first. Prior 1500 Silverado was a 5.3 that I had a procharger on.
Build bed divider, keep items from sliding to the front of the bed.
MPG I have been getting about 19 average on 87 octane.

Now for some pictures. I’ll post the graphic on the hood tomorrow when I have day light. Just added today you can see the red gmc in the pics I took just before.

What bin is that exactly under your rear seats and any issues with it sitting on top of the edge of the floor matt?