Hi from WillyR1er!

willyR1er · Sep 1, 2021

Just thought I would post up some pictures. Have a 2021 1500 6.2. Just sitting under 4K.
Things done:
Pulsar LT
Rolling bed cover
AMP power steps
Custom 12” sub box and storage bin rear seat
Tailgate badge delete “gmc” and “Sierra “
Black matte hood accent graphic

Things wanting to do:
33” Nitto Ridge Grapplers
Finish black matte graphics for tailgate
Figure out graphics for top edge for bed sides, more of a protective vinyl, thinking of just doing a gloss black or clear
ProCharger supercharger, need to wait until I am out of warranty first. Prior 1500 Silverado was a 5.3 that I had a procharger on.
Build bed divider, keep items from sliding to the front of the bed.
MPG I have been getting about 19 average on 87 octane.

Now for some pictures. I’ll post the graphic on the hood tomorrow when I have day light. Just added today you can see the red gmc in the pics I took just before.

Regular Cab Duallies · Sep 2, 2021

willyR1er said:
Just thought I would post up some pictures. Have a 2021 1500 6.2. Just sitting under 4K.
Things done:
Pulsar LT
Rolling bed cover
AMP power steps
Custom 12” sub box and storage bin rear seat
Tailgate badge delete “gmc” and “Sierra “
Black matte hood accent graphic

Things wanting to do:
33” Nitto Ridge Grapplers
Finish black matte graphics for tailgate
Figure out graphics for top edge for bed sides, more of a protective vinyl, thinking of just doing a gloss black or clear
ProCharger supercharger, need to wait until I am out of warranty first. Prior 1500 Silverado was a 5.3 that I had a procharger on.
Build bed divider, keep items from sliding to the front of the bed.
MPG I have been getting about 19 average on 87 octane.

Now for some pictures. I’ll post the graphic on the hood tomorrow when I have day light. Just added today you can see the red gmc in the pics I took just before.

Welcome, some great mods you have done as well as on the future list! When you do the Ridge Grapplers, will you also be doing wheels? It looks sweet.

LamboTexas · Sep 2, 2021

willyR1er said:
Just thought I would post up some pictures. Have a 2021 1500 6.2. Just sitting under 4K.
Things done:
Pulsar LT
Rolling bed cover
AMP power steps
Custom 12” sub box and storage bin rear seat
Tailgate badge delete “gmc” and “Sierra “
Black matte hood accent graphic

Things wanting to do:
33” Nitto Ridge Grapplers
Finish black matte graphics for tailgate
Figure out graphics for top edge for bed sides, more of a protective vinyl, thinking of just doing a gloss black or clear
ProCharger supercharger, need to wait until I am out of warranty first. Prior 1500 Silverado was a 5.3 that I had a procharger on.
Build bed divider, keep items from sliding to the front of the bed.
MPG I have been getting about 19 average on 87 octane.

Now for some pictures. I’ll post the graphic on the hood tomorrow when I have day light. Just added today you can see the red gmc in the pics I took just before.

Welcome and enjoy the forum. Love the truck! I also have a black one. I’ve read where the 35/ 11.50 R 20 tires will fit with no rub. I’m not sure? Please do post pics of the other graphic.

Regular Cab Duallies · Sep 2, 2021

LamboTexas said:
Welcome and enjoy the forum. Love the truck! I also have a black one. I’ve read where the 35/ 11.50 R 20 tires will fit with no rub. I’m not sure? Please do post pics of the other graphic.

@BarE is running 35s on a 2 inch level and reports no rubbing.

"I decided against the reverse level. Went with 2" more in the front and Nitto Ridge Grapplers 35x11.5x20 on the stock 20" rims. Measuring 41 1/4" to fenderwell front and rear. Just picked it up this afternoon. More to come on mileage impact."

"Rough country 2" additional installed by dealer and was told that would not void warranty. Regular driving, speed bumps, driveways, full turn - no rubbing. I am taking it to our farm over the 4th weekend and will put it through the "ditch" test to check the clearances under suspension compression."

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

LamboTexas · Sep 2, 2021

Regular Cab Duallies said:
@BarE is running 35s on a 2 inch level and reports no rubbing.

"I decided against the reverse level. Went with 2" more in the front and Nitto Ridge Grapplers 35x11.5x20 on the stock 20" rims. Measuring 41 1/4" to fenderwell front and rear. Just picked it up this afternoon. More to come on mileage impact."

"Rough country 2" additional installed by dealer and was told that would not void warranty. Regular driving, speed bumps, driveways, full turn - no rubbing. I am taking it to our farm over the 4th weekend and will put it through the "ditch" test to check the clearances under suspension compression."

View attachment 464

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

New to the forum and Lift question

Picked up my 2021 AT4 with 3L this past week. Most are looking to go higher with more clearance for larger tire/rim packages. I am considering taking 1/2 to 1" off the rear to level the truck (mill the blocks down to get the appearance where I want it). Driveline geometry (angle of drive...

www.at4forum.com

Thank you!

willyR1er · Sep 2, 2021

Thank you! Think I am sticking with the stock rims when I need to get the tires.
Her is a better image of the hood and last night I was seeing how the red pin stripping will look if I add it.