AT4X stock 295/70/18 no level no rub

[Nealio]

View attachment 1858
Should be more pictures below. Hope this is of some help. The tires fit nicely, in my opinion. In certain photos it does appear close to rubbing, but the tire is turned out a bit. I haven’t had any incidents where rubbing has occurred.

How do you like the territory MT compared to the Goodyear Durtrac?

 

AT4 Forum Fav 👍

GM 3.0 Duramax Fuel system cap Magnetic Green - Grab one through Amazon!

[Lance L]

I was pretty sure I’d have some rubbing but it clears fine. View attachment 1632

295 70 r18 I ran with rubbing had to trim front wheel wells

 

[Lance L]

295 70 R 18 had a trim front was not really fan went with Nitto Ridge Grapplers did tho looks pretty good RC 1.75 control arms and added

 

[jafo2358]

I was pretty sure I’d have some rubbing but it clears fine. View attachment 1632

No leveling kit?

 

[mrgoodwords]

View attachment 1858
Should be more pictures below. Hope this is of some help. The tires fit nicely, in my opinion. In certain photos it does appear close to rubbing, but the tire is turned out a bit. I haven’t had any incidents where rubbing has occurred.

Looks great! I'm sold -- 295/70R18 here I come.

 

[Chad]

Looks great! I'm sold -- 295/70R18 here I come.

I landed up selling my factory 18’s and I put a 4” BDS lift an I put some Fuel Blackouts with some 35’s with some 20 inch rims the only rub I have is a slight rub backing up at a sharp turn on my passenger side. The ride is still like factory other than the tires I went with some Ridge Grapplers.

 

[Sqachy]

For anyone who has put either 285's or 295's on their truck, have you had any issues fitting that size tire as your spare. Haven't been able to find how big a tire will fit where the current spare goes so any feedback would be useful. I was excited to see that 295/70/18 fit with no rubbing.

 

[WolfCamp]

I put 295/70R18 Nitto Trail Grapplers on my otherwise stock AT4X (i.e., not lifted or leveled). I was concerned about the fitment because of the UCA and the tires rubbing portions of the fender well at full lock, but I can fit my index finger to mid-knuckle between the tire and UCA and haven’t rubbed at full lock or on a hard turning incline.

Are they mt or at?

 

[mrgoodwords]

Just dropped in the ready lift level kit with UCAs and Toyo Open Country AT3s on my 2024 AT4X AEV. Plenty of room

 

[thdoner]

Went with 295/70R18 Toyo Open AT3’s on stock wheels on 2022 AT4X. No rub so far but I’m sure it will at some point. Looking at leveling kit next.

 

[Sinisterj]

Has anyone running 295/70/18 on stock at4x and stock wheels had an alignment to correct the rub? My 295s are rubbing when turning

 

[neverstandstill]

Went with 295/70R18 Toyo Open AT3’s on stock wheels on 2022 AT4X. No rub so far but I’m sure it will at some point. Looking at leveling kit next. View attachment 27960View attachment 27961

Any update on this? Rubbing? I suspect 295's will rub.

 

[neverstandstill]

They sit just about flush with the top of the fender, perhaps poking out a bit where the fender curves in to meet the bumper. There are no modifications affecting the suspension and/or wheel well on my truck. As for rubbing: I just got back from MERUS Adventure Park in the Palo Duro Canyon and had no issues with rubbing on any side at any point.

Following up on this, have you experienced any rubbing since? I'm about to get 295 KO3's on my 2025 AEV edition. Thanks!