2022 AT4X - Larger Tires/Wheels Installed - Pics and Review

Dobes11 · Nov 13, 2022

TexasAT4X said:
Those def look awesome and hope they work out for you. Keep in mind the stock wheels have the offset that will give you the best chance for a taller tire. I have a 20x9 +1 Fuel Wheel which def makes a difference and limits my size some to achieve the stance desired. Thanks and good luck!

Thanks! Yup, trying the 285/65's with stock suspension and stock carbon pro 20's. We'll see...

Dobes11 · Nov 15, 2022

Dobes11 said:
Thanks! Yup, trying the 285/65's with stock suspension and stock carbon pro 20's. We'll see...

Put the 285/65/20 Mickey Thompson Baja Boss's on today. There was a small amount of rubbing on the mud flap at full lock and when turning up a slight incline. So, I trimmed the front a bit and removed the mud flap bracket. Now, no rubbing at all.

under999 · Nov 16, 2022

Rough County AT4X 1.5in Level w/UCA and Nitto Recon 285/75r18

Denalibq · Nov 16, 2022

under999 said:
Rough County AT4X 1.5in Level w/UCA and Nitto Recon 285/75r18

You did the rough country UCAs ? Do you need them with the At4x suspension already gm doesn’t use high angle arms with the factory lift ?

under999 · Nov 16, 2022

Denalibq said:
You did the rough country UCAs ? Do you need them with the At4x suspension already gm doesn’t use high angle arms with the factory lift ?

Yes - I did. My understanding was highly recommended as stock angle could causes issues

edeering03 · Nov 22, 2022

TexasAT4X said:
Added the 1.75” Ready Lift kit today
Huge improvement and now zero rub

2019-2022 GMC AT4 And Chevy Trail Boss - 1.75'' Leveling Kit

1.75" front leveling lift for 2019-2022 GM AT4 and Trail BossNow works with Sierra AT4X or Silverado ZR2 Edition.Includes DOM tube steel upper control arms withTCT maintenance-free pivot bushings and 1-ton ball jointsCNC machined aircraft-grade billet aluminum top and bottom strut spacersAT4 -...

www.readylift.com

First post here...trying to figure out what I'm going to do to my 23 AT4 if/when it ever shows up... Anything you think I need to be aware of if I do the exact same setup with a different +18 offset wheel? I'm assuming it will help a little with rubbing at max steering angles but wasn't sure if I'd be getting to close to the knuckle/ball joint. If you've got a picture of clearance from inside of tire to the ball joint on your setup that would be awesome to put my mind at ease, otherwise if you know it will fit (which I think it should) then that's great just to hear. Do you think with the level and a +18 I'll still need to do the mudflap delete and any trimming? (just normal AT4 not X).

edeering03 · Nov 22, 2022

edeering03 said:
First post here...trying to figure out what I'm going to do to my 23 AT4 if/when it ever shows up... Anything you think I need to be aware of if I do the exact same setup with a different +18 offset wheel? I'm assuming it will help a little with rubbing at max steering angles but wasn't sure if I'd be getting to close to the knuckle/ball joint. If you've got a picture of clearance from inside of tire to the ball joint on your setup that would be awesome to put my mind at ease, otherwise if you know it will fit (which I think it should) then that's great just to hear. Do you think with the level and a +18 I'll still need to do the mudflap delete and any trimming? (just normal AT4 not X).

Nevermind...I see the above post now about 285/65R20's on stock wheels. Should have read the whole thread... +18s should be fine.

Denalibq · Nov 22, 2022

under999 said:
Rough County AT4X 1.5in Level w/UCA and Nitto Recon 285/75r18

Do you have any rubbing or and issues ? did you have to trim anything ? your truck looks great with those tires i would like to do the same

TexasAT4X · Nov 23, 2022

edeering03 said:
First post here...trying to figure out what I'm going to do to my 23 AT4 if/when it ever shows up... Anything you think I need to be aware of if I do the exact same setup with a different +18 offset wheel? I'm assuming it will help a little with rubbing at max steering angles but wasn't sure if I'd be getting to close to the knuckle/ball joint. If you've got a picture of clearance from inside of tire to the ball joint on your setup that would be awesome to put my mind at ease, otherwise if you know it will fit (which I think it should) then that's great just to hear. Do you think with the level and a +18 I'll still need to do the mudflap delete and any trimming? (just normal AT4 not X).

Hi, yes that will def work well and clear no problem with a +18 wheel. Look forward to seeing pics when you get your ride!

palehorse · Jan 14, 2023

Have you added the flap delete kit yet? If so, do you happen to have any updated photos with that kit, as well? Any issues?

I'm basically recreating your truck in NC...

TexasAT4X · Jan 14, 2023

palehorse said:
Have you added the flap delete kit yet? If so, do you happen to have any updated photos with that kit, as well? Any issues?

I'm basically recreating your truck in NC...

Yes, please see pics here after delete kit and trim kit. Came out very clean looking and appears to be like OEM in my opinion. Best of luck with your build!

BigBalco23 · Jan 15, 2023

Denalibq said:
Do you have any rubbing or and issues ? did you have to trim anything ? your truck looks great with those tires i would like to do the same

Also wondering the same

blrover · Feb 9, 2023

TexasAT4X said:
Yes, please see pics here after delete kit and trim kit. Came out very clean looking and appears to be like OEM in my opinion. Best of luck with your build!

Looks good, what fender delete/trim kit did you use?

TexasAT4X · Feb 9, 2023

blrover said:
Looks good, what fender delete/trim kit did you use?

Here is a link to the kit

Truck Hardware Chevy/GMC Finishing Caps - SharpTruck.com

Truck Hardware Finishing Caps allow you to remove the integrated OEM molded splash guards with a cap that completes the fender flare to maintain the OEM appearance. The Finishing Caps are also designed to allow installation of Truck Hardware Gatorback mud flaps. These mud flap delete kits make...

www.sharptruck.com

glj5705 · Feb 16, 2023

TexasAT4X said:
Here is a link to the kit

Truck Hardware Chevy/GMC Finishing Caps - SharpTruck.com

Truck Hardware Finishing Caps allow you to remove the integrated OEM molded splash guards with a cap that completes the fender flare to maintain the OEM appearance. The Finishing Caps are also designed to allow installation of Truck Hardware Gatorback mud flaps. These mud flap delete kits make...

www.sharptruck.com

Hey! Had questions/need confidence in potentially purchasing AT4X. Can you text me? 256-698-4901