2020 AT4 New to group

benm895

New member
Joined
Dec 26, 2022
Messages
11
Reaction score
11
Location
Missouri City, TX
Just picked up a 2020 w/only 14K miles. Added a RC 1.75" leveling kit (swapped bottom strut spacers 1/4", with 1" ones), new Fuel Rebel wheels & RECONs 285/65/20s. Minor rubbing, needed a little trimming. Did tons of research and seems to be working so far.!
Front.jpeg
side.jpeg
at4.jpeg
 

That thing looks sick! Nice tire/wheel combo! Are those true beadlocks? And when you mentioned rubbing, is it the driver side tire on the frame when you turn the wheel full counter-clockwise? I couldn’t fit a bigger tire due to that, just wondering if the leveling kit resolved that issue?
 

Thanks man. The wheels are Fuel Rebel grey (Anthracite) finish. (Not true beadlocks)
https://realtruck.com/p/fuel-grey-rebel-wheels/

Tires are RECONs 285/65/20.

The leveling kit definitely helped with the rubbing. After the leveling kit, I only had a little rubbing on the wheel well liner when my wheel was fully turned, but pulling back the liner helped(zip ties). Also rubbed on the mud flap,.but I initially just trimmed those a little. Then I ended up removing the metal bracket that the mudflap screws in to and installed a mudflap delete kit, and That allowed me to pull back the liner even more. Looks great too! Now pretty much zero rubbing, unless I hit a huge bump & wheel is turned.
 

Pics after removing mudflaps
 

Attachments

  • A8C72929-94B5-470B-B701-FB7ED4585210.jpeg
    A8C72929-94B5-470B-B701-FB7ED4585210.jpeg
    365.1 KB · Views: 104
  • 6AB2DA66-73C1-42F8-975E-08F370F29337.jpeg
    6AB2DA66-73C1-42F8-975E-08F370F29337.jpeg
    374.7 KB · Views: 100

New Posts

Most reactions

Back
Top