New tires/wheels

Nice choice (y) Can't wait to see it when it's all done. Please post pics..

I got a sneak peak from the shop this afternoon.
 

Attachments

  • image_1.webp
    image_1.webp
    121.8 KB · Views: 228
Looks great! I swapped out my stock X wheels for a set of MVX wheels with a -12 offset, but kept the stock tires. I wonder if I went with a 285 if I'd rub?
 

Looks great! I swapped out my stock X wheels for a set of MVX wheels with a -12 offset, but kept the stock tires. I wonder if I went with a 285 if I'd rub?
I'm not sure with that offset. That's why I went with a +20, I felt pretty sure that would be safe since it's pretty close to stock offset. I think I remember watching a video of a guy with a +1 offset and 285's and he was good, no rubbing or trimming
 

2023 AT4 3.0, stock: Original Goodyear Territory MT tires are just too noisy. I'm looking to switch to BFG but in the process go from 275-65-18 to 275-70-18. Gain an inch in height but concerned about interference. Has anyone tried this setup?
 

2023 AT4 3.0, stock: Original Goodyear Territory MT tires are just too noisy. I'm looking to switch to BFG but in the process go from 275-65-18 to 275-70-18. Gain an inch in height but concerned about interference. Has anyone tried this setup?
275/70/18 is what comes stock on AT4X so you should be fine. I'm still fine with 285/70/18's.
 

2023 AT4 3.0, stock: Original Goodyear Territory MT tires are just too noisy. I'm looking to switch to BFG but in the process go from 275-65-18 to 275-70-18. Gain an inch in height but concerned about interference. Has anyone tried this setup?
What did you end up going with here? I just got a AT4 3.0 and going to put BFG's on it. The new KO3's just came out with a 285/70r18 - they've never made that size before in the KO2. Debating between that and the 275/70's. Sounds like 285/70's fit fine but curious what you went with.
 

Toyo 295/70/18 with the ready lift 1.75 level kit including UC arms on 2024 AT4X 1500. No rub, no problem
 

Attachments

  • PXL_20241108_003714829.webp
    PXL_20241108_003714829.webp
    449.8 KB · Views: 224
  • PXL_20241108_003706829.webp
    PXL_20241108_003706829.webp
    359 KB · Views: 225
Toyo 295/70/18 with the ready lift 1.75 level kit including UC arms on 2024 AT4X 1500. No rub, no problem
Looks good, my AT4X is still stock height but I kinda wish I had of went with 295's instead of 285's.
 

Back
Top