295/65/20 KO3's on a stock AT4

I know there are always questions about tire sizes and such. If anyone wants any specific pics let me know I'll take them.

No issues with rubbing even at full turn. Haven't been off road with them yet. But so far they fit fine.

This is stock suspension. I may do a leveling kit and air bags in the back, but most of the stuff I tow isn't super heavy.

I do have a decked system with a bunch tools, so there is a a few hundred lbs in the bed.


View attachment 20230View attachment 20229
Any chance you have a pic from the front center and looking down the side of the truck? I'd be super curious to see where those tires sit.
 

285/60/20 on 0 offset, 285 on stock wheels were too close to Uca in my opinion and when I get new Uca,usually stock wheels can hit
 

Attachments

  • IMG_6142.webp
    IMG_6142.webp
    462.5 KB · Views: 314
  • IMG_6141.webp
    IMG_6141.webp
    412.7 KB · Views: 210
  • IMG_6219.webp
    IMG_6219.webp
    454.1 KB · Views: 262
  • IMG_6217.webp
    IMG_6217.webp
    354.1 KB · Views: 293
  • IMG_6216.webp
    IMG_6216.webp
    444.3 KB · Views: 308
Don’t level or airbag. Your truck will ride like complete 💩.

I’ve been running 295/65/20 for 20k+ miles 100% stock with no problem on or off road at full turn. Towing 6-9k and 20k of my cat backhoe and gooseneck.

For reference i have the S&B 62 gallon fuel tank (+184lbs), 200-300lbs of tools, 48qt cooler, and an anything tote (100lbs) in my bed everyday. Call it 800lbs + always in the bed. Also daily hauled an extra 60gal(427lbs)of diesel for the past month bc it was so cheap to put in my 550 gallon tank at the shop. That’s 1200lbs + whatever trailer I needed for the day.
Imma call bullshit. I have leveled and put airbags in nearly every one of my trucks, and they ride as good as, if not better than, stock. All depends on how you do it.
 

I know there are always questions about tire sizes and such. If anyone wants any specific pics let me know I'll take them.

No issues with rubbing even at full turn. Haven't been off road with them yet. But so far they fit fine.

This is stock suspension. I may do a leveling kit and air bags in the back, but most of the stuff I tow isn't super heavy.

I do have a decked system with a bunch tools, so there is a a few hundred lbs in the bed.


View attachment 20230View attachment 20229
Still happy with your decision to go to larger tires? Ive been thinking about it since my truck was new. Hard for me to justify replacing new tires but still considering it. Im happy with the KO3 so I would go with same tires you did.
 

Still happy with your decision to go to larger tires? Ive been thinking about it since my truck was new. Hard for me to justify replacing new tires but still considering it. Im happy with the KO3 so I would go with same tires you did.
Absolutely. Ride is still quiet and smooth. I can't speak to the longevity of them yet. Only have like 5,000 miles on them. If I needed to get new tires right now, I'd get the KO3's in the exact same size again. I've had good experiences with BFG's on my vehicles.

It was hard to justify replacing brand new tires to go a little bit bigger, I get it. But I like the look so much better. Sell the OEM tires for a few bucks to at least make it not as bad.

I had KO2's on a RAM1500 and got ~50k miles out of them. I hope they have similar wear. I drive pretty hard.
 

Looks really good! I’ve done mine too except with amber I have the cab lights too… how difficult was pulling the headliner down?
 

Painted fender flares too
 

Attachments

  • IMG_1126.webp
    IMG_1126.webp
    249.3 KB · Views: 90
  • IMG_0693.webp
    IMG_0693.webp
    132.4 KB · Views: 95

New Posts

Most reactions

Back
Top