2025 GMC 2500HD AT4X AEV Builds

[skyflier32000]

I appreciate being accepted in the Group, this is my 2025 GMC 2500HD AT4X AEV. I have 37”s on it and had the AEV Spec ComeUp winch installed. I also have added the MBRP Black exhaust, Cam Locker Toolbox, GM Center Console Safe, Dealer swapped out all of my Badges to delete all Chrome and I had them install the Black Illuminated GMC Logo on the grill and a Black & Red AEV Badge installed. Front Windshield and both front windows have been Ceramic Tinted, I have PPF on the front end of the truck and the entire truck is Ceramic Coated on the Interior and Exterior as well as windows. Waiting on Banks to release their Intake and a few of their other Mods for the new 2025 Model. Didn’t have to cut or trim to put the 37/12.50/R18 on and they don’t rub at all even off-road flexing. Also wanting to install the square lights in the rear bumper and potentially a light bar on top of the bumper but tucked in under the grill between it and the Bumper. I’ve been waiting on the outfitter switch Panel to be released first though. I found a guy in North Alabama that did all of the Ceramic Coating for $1200. The Exterior coating has a Lifetime Warranty That is registered to my truck and will show up on Carfax Incase I ever wanted to sell it, which is highly unlikely! The Interior has a 3 Year warranty and is registered to the Truck as well and shows up on Carfax. Has anyone figured out a realistic option for leveling out the Front end without messing up the Suspension? It’s not that far off but I’d probably be interested if I could bring it up an inch or so.

Beautiful truck! I would love to know where I can get the buckles you have on your recovery hooks. Thanks.

 

AT4 Forum Fav 👍

Truck Tire Repair Kit - Grab one through Amazon!

[DEW]

How does the exhaust sound!? Would love to hear it

I have the exact same question.

 

[Northwest4X]

I appreciate being accepted in the Group, this is my 2025 GMC 2500HD AT4X AEV. I have 37”s on it and had the AEV Spec ComeUp winch installed. I also have added the MBRP Black exhaust, Cam Locker Toolbox, GM Center Console Safe, Dealer swapped out all of my Badges to delete all Chrome and I had them install the Black Illuminated GMC Logo on the grill and a Black & Red AEV Badge installed. Front Windshield and both front windows have been Ceramic Tinted, I have PPF on the front end of the truck and the entire truck is Ceramic Coated on the Interior and Exterior as well as windows. Waiting on Banks to release their Intake and a few of their other Mods for the new 2025 Model. Didn’t have to cut or trim to put the 37/12.50/R18 on and they don’t rub at all even off-road flexing. Also wanting to install the square lights in the rear bumper and potentially a light bar on top of the bumper but tucked in under the grill between it and the Bumper. I’ve been waiting on the outfitter switch Panel to be released first though. I found a guy in North Alabama that did all of the Ceramic Coating for $1200. The Exterior coating has a Lifetime Warranty That is registered to my truck and will show up on Carfax Incase I ever wanted to sell it, which is highly unlikely! The Interior has a 3 Year warranty and is registered to the Truck as well and shows up on Carfax. Has anyone figured out a realistic option for leveling out the Front end without messing up the Suspension? It’s not that far off but I’d probably be interested if I could bring it up an inch or so.

Great looking truck! Would you share a picture of the updated AEV badge?

 

[jsstalli]

Great looking truck! Would you share a picture of the updated AEV badge?

Not sure which one other poster has but here is mine.

 

[Northwest4X]

Not sure which one other poster has but here is mine.

Thank you

 

[Sdroberts1986]

Not sure which one other poster has but here is mine.

I have the same red AEV Badge

 

[Sdroberts1986]

Beautiful truck! I would love to know where I can get the buckles you have on your recovery hooks. Thanks

Beautiful truck! I would love to know where I can get the buckles you have on your recovery hooks. Thanks.

I have the exact same question.

 

[Sdroberts1986]

This is the site I ordered them from. I had to take my grinder and touch them up on the inside to get them to fit, but it was simple!

Elite Series 3/4" D-Ring Shackles | Pair

With an 8 ton working load limit, our Elite Series D-Ring Shackles were designed to handle the toughest of recovery situations. They fit industry standard D-Ring mounts and boast an 8 Ton working load limit. Available in Black, Red, White & Gray.

dv8offroad.com

 

[Sdroberts1986]

Great looking truck! Would you share a picture of the updated AEV badge?

 

[Jeff130]

Nice looking truck! Love the red D-rings, gives it a nice touch. What brand are those? Were they hard to install? Thanks!

 

[EODHorn]

Not sure which one other poster has but here is mine.

Where did you get that? Also did you go with dealer black out emblems, or the cap emblems I have seen people get?

 

[jsstalli]

Where did you get that? Also did you go with dealer black out emblems, or the cap emblems I have seen people get?

AEV badge came from EBay. Blacked out badges came from GM.

 

[EODHorn]

AEV badge came from EBay. Blacked out badges came from GM.

Looking on e-bay I assume thats the one that says its for the Colorado? Not sure if the little trucks have a smaller emblem.

 

[jsstalli]

Looking on e-bay I assume thats the one that says its for the Colorado? Not sure if the little trucks have a smaller emblem.

Yes that is the one. It is normal size.

 

[Northwest4X]

Where did you get that? Also did you go with dealer black out emblems, or the cap emblems I have seen people get?

I ended up getting my replacement badges from Kingpin Branding. You might check them out.