2" Leveling Kit Pictures - Send them

[Dfletch15]

Leveled with a 20x9 +1 wheel and 295/60
I tried a 295/65 and would have had to trim too much to make them work. If you stick with a +18 or +20 wheel you might get 285/65 to fit, but still a little tight IMO. I think this tire size looks good and more importantly no cutting (I do have the AEV bumper and no mudflaps, so might might a difference if comparing). Thanks and good luck with your build!

Man I love your setup! I have a ‘19 1500 AT4 stock but looking to put new wheels and tires in it and level the front

Did you level yours?

 

AT4 Forum Fav 👍

Console Safe Gun Safe for GMC Sierra - Grab one through Amazon!

[pigpen23]

I'm leveled with 2.5" Fox coilovers. Running 285/65R20s Ridge Grapplers on factory wheels with 1.25" spacers.

 

[Thunder_Grey2025]

View attachment 26301
I'm leveled with 2.5" Fox coilovers. Running 285/65R20s Ridge Grapplers on factory wheels with 1.25" spacers.

Any rubbing or modifications needed to fit those? I'm loving the look..

 

[Jmyersstorm2025]

Are At4x's allowed here?! Apologize in advance! Just leveled the front and put on 295/70/18 Nittos today

Looks great! What kit do you use for leveling the front? Any trimming needed?

 

[gemarsh]

Looks great! What kit do you use for leveling the front? Any trimming needed?

Welcome.

 

[pigpen23]

Any rubbing or modifications needed to fit those? I'm loving the look..

There was quite a bit of rubbing, but I trimmed the mudflaps to eliminate most of it. At full lock, on uneven ground, still have a slight bit of rubbing.

 

[Thunder_Grey2025]

There was quite a bit of rubbing, but I trimmed the mudflaps to eliminate most of it. At full lock, on uneven ground, still have a slight bit of rubbing.

Would they have not fit without the spacers?

 

[pigpen23]

Would they have not fit without the spacers?

They would’ve fit, but I like the look of the spacers. Some people run like a 1/4” spacer if they don’t change out the factory upper control arms to make sure there’s enough clearance there for the tire.

 

[Thunder_Grey2025]

They would’ve fit, but I like the look of the spacers. Some people run like a 1/4” spacer if they don’t change out the factory upper control arms to make sure there’s enough clearance there for the tire.

Wait you did change out your control arms right?

 

[pigpen23]

Wait you did change out your control arms right?

yeah with Cognitos.

 

[Thunder_Grey2025]

yeah with Cognitos.

How you liking them now that you've had them on for a few months? How's the mpgs with them?

I'm getting tired of my Terra Grapplers and thinking of doing the Ridge Grapplers as I want something more aggressive.

 

[pigpen23]

The ridge graps are a great tire for what I need, and I get excellent mileage out of a set. The last set I had saw 60k before needing to replace them.

My fuel mileage is so hard to report because I do quite a bit of idling and towing, and I drive around empty like I'm always on a mission lol. On the highway, I typically see 20-22 MPG with the cruise set between 75-80. Every day driving, I think I average around 18-20ish.

 

[Thunder_Grey2025]

The ridge graps are a great tire for what I need, and I get excellent mileage out of a set. The last set I had saw 60k before needing to replace them.

My fuel mileage is so hard to report because I do quite a bit of idling and towing, and I drive around empty like I'm always on a mission lol. On the highway, I typically see 20-22 MPG with the cruise set between 75-80. Every day driving, I think I average around 18-20ish.

Yeah I don't do much driving, but I'm really thinking of switching these G3's just for something more aggressive. I think I average around that right now, so not bad. I might pick up a set and sell these then..

 

[SmittysAT4]

yeah with Cognitos.

Like it! Is that the 210-P1298 Cognito 1-Inch Elite Ball Joint Leveling Kit with Fox 2.5 Elite Performance Series Shock Kit? or the 210-P0885 Cognito 1-Inch Performance Ball Joint Leveling Kit With Fox PS Coilover 2.0 IFP Shock kit? Been looking at a bunch of options and I keep coming back to one of these. Debating between the 2.5 or the 2.0 shocks.

Oh and how did you get the larger HD mirrors on there?

 

[Thunder_Grey2025]

Like it! Is that the 210-P1298 Cognito 1-Inch Elite Ball Joint Leveling Kit with Fox 2.5 Elite Performance Series Shock Kit? or the 210-P0885 Cognito 1-Inch Performance Ball Joint Leveling Kit With Fox PS Coilover 2.0 IFP Shock kit? Been looking at a bunch of options and I keep coming back to one of these. Debating between the 2.5 or the 2.0 shocks.

Oh and how did you get the larger HD mirrors on there?

He has the 2.5 Elite Fox.