Upgrading 2500 AT4 Tires

[Admin]

What's the largest tire that fits on the stock AT4 HD wheel without rubbing?

 

AT4 Forum Fav 👍

Truck Tire Repair Kit - Grab one through Amazon!

[Stuart]

I'd like to hear what fits stock 20" rims as well. AT4HD

 

[gemarsh]

285/65 r20 (35x11.5x20) Nitto exo grapplers will not rub crossing ditches at an angle.

 

[Admin]

Anyone running a 295/65r20?

 

[RugbyRef]

Anyone running a 295/65r20?

I ran those on my AT4X. Thinking of going the same on my AT4 HD.

 

[Stuart]

285/65 r20 (35x11.5x20) Nitto exo grapplers will not rub crossing ditches at an angle.

Thanks

 

[GreenGiant]

See my other post, where I said: "I did full turn angle on '22 2500 AT4, and found clearance of only 1 cm from wheel well liner on back of stock tires (275/65 r20). I would have to cut/modify liner to put anything larger. For example I was interested in 295/60 r20 (e.g. Michelin LTX Platinum or something) but now I'm afraid that will rub."

 

[Rowdy]

Hi all, first time poster and happy to be here. Just took delivery of a 2025 AT4 HD and would like to swap out factory tires for a 295/65/20. Has anybody done this as I do not want to modify factory suspension. Would like to go with the Nitto Ridge Grapplers and hoping for no rubbing. Thanks in advance for any info.

 

[Rowdy]

I guess I should add that i'd like to mount these on the stock wheels so offset would be the same.

 

[gemarsh]

Hi all, first time poster and happy to be here. Just took delivery of a 2025 AT4 HD and would like to swap out factory tires for a 295/65/20. Has anybody done this as I do not want to modify factory suspension. Would like to go with the Nitto Ridge Grapplers and hoping for no rubbing. Thanks in advance for any info.

Welcome.

 

[phobby]

Hi all, first time poster and happy to be here. Just took delivery of a 2025 AT4 HD and would like to swap out factory tires for a 295/65/20. Has anybody done this as I do not want to modify factory suspension. Would like to go with the Nitto Ridge Grapplers and hoping for no rubbing. Thanks in advance for any info.

Nobody makes the same size tire. But to answer your question I’m running Mickey Thompson Baja legend EXP 295/65/20=35.4” X 11.6”(MT stated dimension) no rubbing or trimming stock AT4 HD wheels at factory height.

Ridge grappler 295/65/20= 35.1” X 11.77
I don’t see an issue with 0.17” wider.

 

[pinebaron]

Hi all, first time poster and happy to be here. Just took delivery of a 2025 AT4 HD and would like to swap out factory tires for a 295/65/20. Has anybody done this as I do not want to modify factory suspension. Would like to go with the Nitto Ridge Grapplers and hoping for no rubbing. Thanks in advance for any info.

Welcome

 

[Rowdy]

Nobody makes the same size tire. But to answer your question I’m running Mickey Thompson Baja legend EXP 295/65/20=35.4” X 11.6”(MT stated dimension) no rubbing or trimming stock AT4 HD wheels at factory height.

Ridge grappler 295/65/20= 35.1” X 11.77
I don’t see an issue with 0.17” wider.

Appreciate the info. Had Goodyear Duratrac 305/55/20 on a 2015 Silverado HD and heard the space in the wheel well of the newer truck had more room. Not sure if this is true but was wanting to try 295/65/20 on this one.

 

[phobby]

Appreciate the info. Had Goodyear Duratrac 305/55/20 on a 2015 Silverado HD and heard the space in the wheel well of the newer truck had more room. Not sure if this is true but was wanting to try 295/65/20 on this one.

Should be fine just look at each tire mfr specifications. You’d also be surprised at weight differences.
295/65/20
Bfg AT- 67lbs
MT Exp-66lbs
MT Boss At-69lbs
Falken AT4-72lbs
Michelin Ltx platinum-66lbs.
Toyo R/T-69lbs
Nitto G3-62lbs
Nitto Recon-65lbs
Nitto Ridge-69lbs
Toyo Open country-63
Toyo HD-72lbs

 

[True Bee]

This might be helpful to some folks I plan to pick up a set when I can hoping to put 37" to 38" tires under my AEV edition HD.

Fender liner pull back kit