Stock 21 AT4…can I run 285/65/20?

I have the same tires with an 1.5” level. Very minor rub at full lock. Stock will probably rub more.
 

Attachments

  • 3E2A7215-4357-4034-8F49-2B3F82F1E212.jpeg
    3E2A7215-4357-4034-8F49-2B3F82F1E212.jpeg
    561.2 KB · Views: 721
  • 03E587DA-6F43-4A1B-BD44-53842C890E4C.jpeg
    03E587DA-6F43-4A1B-BD44-53842C890E4C.jpeg
    559.3 KB · Views: 935
@Soggycow - here's mine with 295/65R20's with no after-market lift or level. Zero rubbing in any amount of turn.

IMG_0608[1].JPG
 

Which model? 295/65 probably fits fine on a 3500, but highly unlikely on the 1500. I have 275/65 on my stock 1500 with no rubbing but it’s close. With a less aggressive tread you may be able to get away with 285/65 but I think mine would have rubbed.
 

Which model? 295/65 probably fits fine on a 3500, but highly unlikely on the 1500. I have 275/65 on my stock 1500 with no rubbing but it’s close. With a less aggressive tread you may be able to get away with 285/65 but I think mine would have rubbed.

2024 3500HD AT4. You're probably correct.
 

@Citt53, which tire did you go with? I'd like to run LT275/65r20 with Toyo AT3's but would like to avoid any trimming. My truck is currently stock.
 

Most reactions

Back
Top