Parts You Wish Were Made

[Hatche90]

What would be a part that you wish someone would make for your AT4? What make and year of AT4 do you own?

 

AT4 Forum Fav 👍

Bedrug XLT Bed Mat | 2019 - 2023 GMC Sierra 1500 - Grab one through Amazon!

[True Bee]

Front lockers!!!
2024 2500 AEV

 

[Hatche90]

Front lockers!!!
2024 2500 AEV

Are you referring to manual lockers to engage and disengage the front axles?

 

[True Bee]

Are you referring to manual lockers to engage and disengage the front axles?

Those would be a bonus as well but I'm talking about manual or electric to lock the differential

 

[Johnv76]

Are you referring to manual lockers to engage and disengage the front axles?

He is talking about the electronic lockers like the ones that come in the AT4x 1500's.

 

[True Bee]

He is talking about the electronic lockers like the ones that come in the AT4x 1500's.

That is correct the 1500 has E lockers front and rear. The HD only has E locker on the rear.

 

[Hatche90]

Those would be a bonus as well but I'm talking about manual or electric to lock the differential

Aw, I see what you are talking about now

 

[john151ama]

Second the front locker. Also add a cheap replacement shift handle for the HD’s that is bent or shorter. There is an expensive trade in one posted on here that is now available, but one that is $100 bucks and doesn’t require sending in the OEM would have me sold real fast.

 

[john151ama]

Also a 2KW inverter like ford offers for running higher amp items like coffee makers and tools. Still wish my AT4x had that

 

[gemarsh]

Delete kit that was epa and carb approved.

 

[Hatche90]

Delete kit that was epa and carb approved.

Now that’s something we can all wish for.

 

[Hatche90]

Delete kit that was epa and carb approved.

Now that’s something we can all wish for

Second the front locker. Also add a cheap replacement shift handle for the HD’s that is bent or shorter. There is an expensive trade in one posted on here that is now available, but one that is $100 bucks and doesn’t require sending in the OEM would have me sold real fast.

Link to what you are referring to.

 

[john151ama]

Now that’s something we can all wish for

Link to what you are referring to.

Thread 'Solution to infotainment being blocked by shifter arm'
https://www.at4forum.com/threads/solution-to-infotainment-being-blocked-by-shifter-arm.3232/

 

[Leo581]

I'll go with features. A hood similar to the ZR2 and a panoramic sunroof.

 

[Teegunn]

Also a 2KW inverter like ford offers for running higher amp items like coffee makers and tools. Still wish my AT4x had that

This. Why in the world did they make the amps so low on that bed plug? Dumb.

Only thing I much use the low amp bed plug for is my small hotdog compressor. Think of a cheap walmart level compressor, as I think it is 1/3rd HP and that is all that will run on that low amps. Driving around jobsites daily a guy picks up nails/screws and a compressor that can be used on the go is kinda nice. Keep it in my truck bed 100% of the time. I have a BAK hard rolling cover so weather/water is not really an issue for any tools in the truck bed.

I have used the bed plug to run a battery charger for my dump trailer. Sept of 23 I hauled about 500K lbs of road mix for my 1/4 mile driveway. So lots and lots of loads of road mix in my dump trailer. Took me 3 days, and by later in the day each day, the dump trailer battery was about dead/or dead. Ran a shorter cord from my bed plug to the charger in the dump trailer, which gave me enough charge/juice to hoist the dump box.

But can't run much for any other tools. A miter saw would be nice to be able to use with the bed plug, but not a chance at those low amps.