Viking Truck
Well-known member
At what PSI? The data each manufacturer uses is often not comparable with others.
New Titanium Rush AT4 2500
- Thread starter NHAT4SFD
- Start date
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #47
So guys , mind if we curb all the compressor talk unless it's related to my build ... Just muddies up the thread... Thanks...
pinebaron
Well-known member
- Part Number: AC-XD4000
- Voltage: 12 or 24 Volts DC
- Max Amperage: (180 @ 12 VDC)(90 @ 24VDC)
- Maximum Duty Cycle: 100% @ 200 PSI
- Maximum Pressure: 200 PSI
- CFM @ 0 PSI: 15 CFM
- Length: 21″ (533.4 mm)
- Width: 7″ (177.8 mm)
- Height: 11″ (279.4 mm)
- Weight: 62 lb (28.12 Kg)
- NMFC: 118100-03
- Class: 100
- Density: 10.3897
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #49
Does anyone know where the transmitter pocket is for the key fob if it's dead to start your vehicle? Thanks.
pinebaron
Well-known member
Did you mean the battery pocket in the key fob?
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #51
pinebaron
Well-known member
Its on the right side of the drive door handle or between cup holders behind center console. I had no idea but looked it up.
Last edited:
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #53
where did you reference this? none of those seem right for this model. since I had the center console out, there needs to be a sensor to read the fob and there isn't one between the cup holders..
Viking Truck
Well-known member
Pretty sure the owners manual (what we should all reference) says in the tray below the start switch.
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #55
I have found it and tested it. It's in the little " pen tray" to the left of the cup holders.
Attachments
pinebaron
Well-known member
That’s good to know.
pinebaron
Well-known member
My apologies if I misled anyone; obviously I was wrong.
Viking Truck
Well-known member
You just posted that picture to remind me I dont have the aux switches.
OP
NHAT4SFD
Member
- Joined
- Sep 21, 2024
- Messages
- 88
- Reaction score
- 88
- Location
- New Hampshire
- Military
- USNR
- First Responder
- FF
- Thread Starter
- #59
My bumper shipped. Be here Thursday.. then to the paint shop... Ordered my winch , and bumper mounted lights...
Shipping on the bumper was COD, got a call from the shipper, I owe $720. WTF. Last bumper 4 years ago was $280. I called Buckstop, We never talked shipping cost, but they should have known approx shipping... Told them had I known the shipping cost I would have not placed the order, and after having purchased from them for the 4th time, I was very irritated... They offered to split the shipping.... I'll take that....
Shipping on the bumper was COD, got a call from the shipper, I owe $720. WTF. Last bumper 4 years ago was $280. I called Buckstop, We never talked shipping cost, but they should have known approx shipping... Told them had I known the shipping cost I would have not placed the order, and after having purchased from them for the 4th time, I was very irritated... They offered to split the shipping.... I'll take that....
True Bee
Active member
For one bumper that's insane!
It's been about two years since I ordered a pallet of wood pellets but that was only about $380.
