Leveled……Now what?!

[GeauxJoe]

First post here. What’s up. Got a 21 AT4 6.2L V8. Had the front windows tinted, retraxpro bed cover installed and just leveled it today with RC 1.75” leveling kit.

Interested to see some pics and hear what’s the largest/best AT tire you can put on here now without any trimming?

 

AT4 Forum Fav 👍

Truck Tire Repair Kit - Grab one through Amazon!

[NCB_’22AT4]

Gonna be pretty limited if you stay with stock wheels. I chose to stay with the stock wheels. Added the ReadyLift 1.75” leveling kit to my ‘22. It’s going in for 1.25” BORA spacers and a set of LT295/70R18 Nitto Recon Grapplers next week. Is going to require some trimming however.

 

[TonyAT4]

Looks good. Do you have the before and after measurements form the lift?

 

[GeauxJoe]

Looks good. Do you have the before and after measurements form the lift?

No, I didn’t think to do that

 

[GeauxJoe]

Gonna be pretty limited if you stay with stock wheels. I chose to stay with the stock wheels. Added the ReadyLift 1.75” leveling kit to my ‘22. It’s going in for 1.25” BORA spacers and a set of LT295/70R18 Nitto Recon Grapplers next week. Is going to require some trimming however.

Interested to see how it looks and how much trimming is required

 

[adeerchaser]

There are threads on here that have folks running 295/70/18 with no additional lift and no rubbing , no cutting- look around, do not remember which threads have it. Due to shape of GMC front wheel well- it take a lotta lift ( 4 in plus ) to get a much bigger tire in there from what I have seen. The width becomes the factor turning and flexing.

 

[z28tranz]

There are a few people who have run 37's with just a 2" level. It is doable but you will have to trim multiple areas to make it work. Go look at LTWMotorsports on IG and you will see.