Level Kit Installed Today

[cfoosh]

Installed my 1.75 Readlift Level Kit with control arms today. Went with 285/65 20 Nitto Ridge Grapplers. Really happy with how it turned out and so much quieter ride as opposed to the factory Goodyear Wranglers. I honestly thought I had a wheel bearing issue because those factory tires were so loud.

 

AT4 Forum Fav 👍

Console Safe Gun Safe for GMC Sierra - Grab one through Amazon!

[cfoosh]

Only question I have is about the UCA. The aftermarket UCA by readylift sits pretty close to the new, bigger tires. Is this ok? Clearance of about 1/2”.

 

[Duramaximus]

That close eh? I guess it depends on how comfortable you are with that spacing.

 

[cfoosh]

That close eh? I guess it depends on how comfortable you are with that spacing.

I’ve driven about 50 miles and it hasn’t been an issue. Full lock or otherwise. Wasn’t sure what everybody else’s experience might have been but I’m trying to avoid spacers if I can help it.

 

[flcmcya]

1/2 inch sounds pretty good...... I'm getting my SST kit put on shortly..... I have 18's though.
Thanks for the intel!

 

[cfoosh]

1/2 inch sounds pretty ggod...... I'm getting my kit put on shortly.
Thanks for the intel!

Yep. Let me know how it turns out. Pictures don’t do it justice. Really made a huge difference in the stance of the truck and height.

 

[Teegunn]

The front level looks good! Definitely improves the look and stance.

 

[TonyAT4]

Looks good. Do you have before and after measurements?
1/2” is plenty of clearance to the UCAs.

 

[kkohne10]

Only question I have is about the UCA. The aftermarket UCA by readylift sits pretty close to the new, bigger tires. Is this ok? Clearance of about 1/2”

It’s close, but no problem. Adding spacers to avoid my constant concerns while rolling at 80mph

 

[cfoosh]

Looks good. Do you have before and after measurements?
1/2” is plenty of clearance to the UCAs.

Front went from 38” to 41.5”
Rear went from 40.5” to 41.5”

Measured from ground to top of wheel wells.

 

[Dino76033]

Installed my 1.75 Readlift Level Kit with control arms today. Went with 285/65 20 Nitto Ridge Grapplers. Really happy with how it turned out and so much quieter ride as opposed to the factory Goodyear Wranglers. I honestly thought I had a wheel bearing issue because those factory tires were so loud.

Id love to see more picture of your truck from different angles.

 

[cfoosh]

Id love to see more picture of your truck from different angles.

Will get that for you.

 

[cfoosh]

Will get that for you.

Here you go. Pictures don’t do it justice, but you can get an idea.

 

[Duramaximus]

Looks good man! Congrats!

 

[Dino76033]

Here you go. Pictures don’t do it justice, but you can get an idea.

Thank you! I'm loving that look. Any rubbing to deal with?