Inexpensive leveling kit

[Beej]

Looking for an inexpensive leveling kit for my 2021 AT4. Any suggestions?

 

AT4 Forum Fav 👍

Ironclad EXO Motor Impact Gloves - Grab a set through Amazon!

[Cwales]

Looking for an inexpensive leveling kit for my 2021 AT4. Any suggestions?

I would honestly look at good quality . It will pay off in the long run.
i went with Ready Lift sst. 2 inch lift in front, 1 in the back if you want it, but most importantly- upper control arms to support the lift.

 

[Bigdaddy]

I just got the ready lift one but without the rear blocks.

 

[Cwales]

I just got the ready lift one but without the rear blocks.

I didn’t install the rear either

 

[Beej]

I would honestly look at good quality . It will pay off in the long run.
i went with Ready Lift sst. 2 inch lift in front, 1 in the back if you want it, but most importantly- upper control arms to support the lift.

Thank you. I’m reading lots of people are using the ready lift, so it must be the way to go. Appreciate the advise

 

[jason8]

I went with the 2" leveling kit from rough country and so far so good.

 

[Beej]

I went with the 2" leveling kit from rough country and so far so good.

Thanks. Did it make the ride any rougher?

 

[jason8]

It rides the same. I can't tell any difference.

 

[Yellow05gt]

It rides the same. I can't tell any difference.

How did your angles change on your UCAs and Axles? Any issues so far?

 

[jason8]

How did your angles change on your UCAs and Axles? Any issues so far?

Have not had any issues so far with about 25K miles. Only issue i have noticed is excessive tire wear on the outside of each tire but could be from needing front end alignment.

 

[Yellow05gt]

Have not had any issues so far with about 25K miles. Only issue i have noticed is excessive tire wear on the outside of each tire but could be from needing front end alignment.

That’s good to hear. I may just buy the cognito UCAs just to have them