In-bed tie downs?

Are you talking about these? They are awesome, but you're saying they don't fit a '24? Their website doesn't mention gm changed the bed on the 24.

First I have heard of this.
 

These. The base will not clear the cutout.
1000001973.webp
 

Sorry forgot link in first post. But yeah, those.

I know you have to cock and maneuver them around to pop in. I had to loosen the center screw out and then restart the screw a couple of threads. They barely go in, but that is good I guess.
 

These aren't retractable but have you seen these. I put a set on a 2017 Sierra and they worked great. The ones I bought were factory GMC though.


AUTOBABA 4PCS 23146899 Truck Bed Tie Down Anchors Compatible with 2014-2024 Chevy Silverado GMC Sierra 2015-2024 Chevy Colorado GMC Canyon OE #23146899 22854815 22987602 https://www.amazon.com/dp/B0C2H75LPM?tag=at4forum-20
 

These aren't retractable but have you seen these. I put a set on a 2017 Sierra and they worked great. The ones I bought were factory GMC though.


AUTOBABA 4PCS 23146899 Truck Bed Tie Down Anchors Compatible with 2014-2024 Chevy Silverado GMC Sierra 2015-2024 Chevy Colorado GMC Canyon OE #23146899 22854815 22987602 https://www.amazon.com/dp/B0C2H75LPM?tag=at4forum-20
Your link says it's fit all the way to 2024. That's why I'm at a loss of why his bull rings are not fitting.

I have not heard of any bed changes in 24. I'm at my dealer now. I'll question.
 

I'm wondering if he got miss labeled tie downs?
 

These aren't retractable but have you seen these. I put a set on a 2017 Sierra and they worked great. The ones I bought were factory GMC though.


AUTOBABA 4PCS 23146899 Truck Bed Tie Down Anchors Compatible with 2014-2024 Chevy Silverado GMC Sierra 2015-2024 Chevy Colorado GMC Canyon OE #23146899 22854815 22987602 https://www.amazon.com/dp/B0C2H75LPM?tag=at4forum-20
The back portion of those are different from the Bull Rings I had. Yours look like a much slimmer assembly with a toggle bolt setup. The Bull Rings look like this:
1708534136939.webp
 

As other posters state, '24 should be the same. I have a '22 2500 ATF. I bought from RealTruck, part# BLR-1019, specifically states GMC Sierra 2500. Mine looks like your drawing. You probably have to angle and jiggle them, make sure screw is REMOVED to allow maximum motion. I actually started procedures to return them 'cause I thought they don't fit, but I got all 9 in!
 

New Posts

Most reactions

Back
Top