IM SICK... 2022 2500 AT4 WHEEL WELL LINER AND MUD FLAP TRIMMING...

[oonighttrain]

I GOT A NEW 2500 AT4 A FEW MONTHS AGO. I WANTED TO PUT 35'S ON IT, THE PLACE THAT INSTALLED THE TIRES FOR ME SAID IT WOULD JUST REQUIRE A VERY SMALL AMOUNT OF TRIMMING TO MAKE THE TIRES NOT RUB.
WELL, AFTER NOTICING DIRT AND SAND UP FRONT OF THE DOOR JAMB (INNER REAR PART OF FRONT FENDER) I CAN SEE A SUBSTANCIAL AMOUNT OF TRIMMING WAS DONE, ENOUGH TO ALLOW WATER ETC TO COME IN WHERE I DONT THINK IT SHOULD.. ANYONE PUT 35'S ON THERE TRUCK WITHOUT MAJOR TRIMMING..

 

AT4 Forum Fav 👍

PEDAL COMMANDER for GMC Sierra 1500/2500/3500 - Grab one through Amazon!

[oonighttrain]

PHOTOS:

 

[Duramaximus]

I GOT A NEW 2500 AT4 A FEW MONTHS AGO. I WANTED TO PUT 35'S ON IT, THE PLACE THAT INSTALLED THE TIRES FOR ME SAID IT WOULD JUST REQUIRE A VERY SMALL AMOUNT OF TRIMMING TO MAKE THE TIRES NOT RUB.
WELL, AFTER NOTICING DIRT AND SAND UP FRONT OF THE DOOR JAMB (INNER REAR PART OF FRONT FENDER) I CAN SEE A SUBSTANCIAL AMOUNT OF TRIMMING WAS DONE, ENOUGH TO ALLOW WATER ETC TO COME IN WHERE I DONT THINK IT SHOULD.. ANYONE PUT 35'S ON THERE TRUCK WITHOUT MAJOR TRIMMING..

Why are you yelling?

Sadly, I believe that is the price you pay for moving to 35" tire land.

 

[Oldschool]

Why are you yelling?

Sadly, I believe that is the price you pay for moving to 35" tire land.

He may not understand that using uppercase is Yelling

I don’t know why people are still trying to stuff 35” tires in these trucks with the stock lift!

 

[phobby]

PHOTOS:

Do you want another set of the bottom Pieces for your truck? I put the extended models on my dually and these are laying in my shop. Traded that truck already.

Someone also makes the Same shorter cap that removes the mud flap design.
This is one example- https://www.dieselpowerproducts.com...MIwMeBhrK__AIVRylMCh1T7wd3EAQYAiABEgKMH_D_BwE

 

[adeerchaser]

I GOT A NEW 2500 AT4 A FEW MONTHS AGO. I WANTED TO PUT 35'S ON IT, THE PLACE THAT INSTALLED THE TIRES FOR ME SAID IT WOULD JUST REQUIRE A VERY SMALL AMOUNT OF TRIMMING TO MAKE THE TIRES NOT RUB.
WELL, AFTER NOTICING DIRT AND SAND UP FRONT OF THE DOOR JAMB (INNER REAR PART OF FRONT FENDER) I CAN SEE A SUBSTANCIAL AMOUNT OF TRIMMING WAS DONE, ENOUGH TO ALLOW WATER ETC TO COME IN WHERE I DONT THINK IT SHOULD.. ANYONE PUT 35'S ON THERE TRUCK WITHOUT MAJOR TRIMMING..

My last truck was a 2021 AT4 HD, I had them swap my tires off my old truck while doing paperwork. I left rolling on Toyo MT’s- 35’s. Stock suspension, no cutting, no rubbing. I did level the truck quickly when I got home, but they never rubbed in the 1000 or so miles I was stock. I was on factory wheels, it appears in on pic you are not on stock wheels- could that be the cause? Maybe wrong off set, width, etc. From what I have read and discovered- you can fit a larger tire riding on the stock wheel. Just my 2 cents.
If it were me, I would surely take phobby up on nice offer!

 

[adeerchaser]

Do you want another set of the bottom Pieces for your truck? I put the extended models on my dually and these are laying in my shop. Traded that truck already.

Someone also makes the Same shorter cap that removes the mud flap design.
This is one example- https://www.dieselpowerproducts.com...MIwMeBhrK__AIVRylMCh1T7wd3EAQYAiABEgKMH_D_BwE

Nice offer man

 

[phobby]

Nice offer man

they aren’t expensive, $60 for the extended versions from the GMC website. The front tires on the Dually threw rocks into the face of the rear fenders. The extended one I think helped.

 

[M_Steeber]

Do you want another set of the bottom Pieces for your truck? I put the extended models on my dually and these are laying in my shop. Traded that truck already.

Someone also makes the Same shorter cap that removes the mud flap design.
This is one example- https://www.dieselpowerproducts.com...MIwMeBhrK__AIVRylMCh1T7wd3EAQYAiABEgKMH_D_BwE

Do you know if Kelderman is the only option for the fender caps?

 

[reb0957]

Did that even need to be cut for 35's? I put 295/65 on yesterday and they are only rubbing the fender liner because the side walls are super knobby. I didn't have to touch the mud flap at all!....Then again this could be a width not height deal!

 

[phobby]

Did that even need to be cut for 35's? I put 295/65 on yesterday and they are only rubbing the fender liner because the side walls are super knobby. I didn't have to touch the mud flap at all!....Then again this could be a width not height deal!

One photo shows Hostile wheels= explains it all.

 

[Wakinvol]

One photo shows Hostile wheels= explains it all.

And rubber band tires.

 

[FunHuman]

Did that even need to be cut for 35's? I put 295/65 on yesterday and they are only rubbing the fender liner because the side walls are super knobby. I didn't have to touch the mud flap at all!....Then again this could be a width not height deal!

Did you install on 18'or 20's? If 20's do you think you can get away with the 295's for every day driving with really minor touchs of the fender liner?
I like the Bridgestone's and would just size up.

 

[reb0957]

Did you install on 18'or 20's? If 20's do you think you can get away with the 295's for every day driving with really minor touchs of the fender liner?
I like the Bridgestone's and would just size up.

Yes, and towing! I have taken that particular side apart several times to change the fender light. Loosened the liner up, moved it around, bent in a few spots no worries! Excuse the dirty truck! Again these tires are really knobby on the side wall and that is what was rubbing!

 

[phobby]

Did you install on 18'or 20's? If 20's do you think you can get away with the 295's for every day driving with really minor touchs of the fender liner?
I like the Bridgestone's and would just size up.

295/65/20 fit perfectly fine on stock wheels. I have the Baja Legend EXP 295/65 on a 23 AT4-HD no level or trimming.