Engine/belt issue - got ideas?

jas0n79

New member
Joined
Nov 10, 2025
Messages
16
Media
2
Reaction score
5
Location
Santa Clara, CA
I just tried driving to pick my daughter up and started hearing what sounded like belt flapping or a pulley squealing sound, corresponding to RPM (somewhat). I have posted a video on YouTube, recording a short clip of what it sounds like at idle and when revving the engine.

First video is at idle, recorded from underneath truck

Second video is at idle with me revving engine towards the end of the clip

My truck is a 2022 Sierra AT4X with about 21k miles.

I have no indicators (e.g. "check engine") on my dash either. I'll be taking it to the dealer tomorrow morning - hoping whatever is wrong is covered under the powertrain warranty.
 

Last edited:
I hope the dealer isn't far.

The video makes it sound like a single knock and not a double knock. My money is on lifters and not a rod bearing.
 

I took my truck to the dealer today. I am thinking it'll be at least two weeks. I'll post an update after I hear what their diagnostic analysis reveals.
 

Just heard back from the local Chevy dealer... They observed a knock sensor code indicating a rod or main bearing failure. They also observed metal shavings in the oil. Thankfully the truck is under powertrain warranty and the recall warranty. They've ordered a new engine. Waiting to hear how long the job will take.
 

Update - It's now April 10 and I'm still waiting for parts at the local chevy dealer. Their inspection found that I also had metal in my radiator. I'll be getting a new radiator someday. It's the radiator that is on backorder from GM with no clear indicator when a new one will be available. Meanwhile, as gas prices are high, I'm driving a Chevy Equinox EV (loaner) from the dealer.

My prediction is that the replacement will ultimately take 2 months at the rate things are going. I do miss my truck and the Borla Sport exhaust. EVs are nice and quiet, but the sound of a truck on a cold start is something special!
 

It is now July 1, 2026. My engine and radiator were replaced back in early May. They then moved on to diagnose a lane assist / adaptive cruise control issue. My truck has continued to stay in the shop and it seems like my dealer and field service engineer have NO CLUE what they are doing. They are replacing the 4th camera part chasing error codes.
 

I got my truck back last week... finally. They ended up fixing the lane assist issue after replacing a bunch of camera modules and doing recalibrations. BUT, my passenger power mirror is now all jacked up. Apparently, the dealer didn't touch the passenger power mirror in the 4 months that my truck was at the dealer. As far as I'm concerned, my truck went in with no issues on this mirror and now the mechanism is messed up. My problems are getting smaller, but there are still annoying issues. I'll start a new thread on asking for advice on whether a power mirror mechanism is something I can replace myself (if I need to foot the bill) or if I should have the dealer do it. The dealer said the new mechanism with labor to reinstall will be about $1150.
 

New Posts

Most reactions

Back
Top