Bed Pocket Plugs

[Cablebandit]

$70,000 truck and they can't include the rear plugs for the stake pockets!? Does anyone have any good suggestions for this 50 cent part? I've seen many 20 dollar versions on Amazon but since they all seem to be variations of the same Chinese part, are any of them better than the others. I mainly just want the thing not to fly out going down the interstate.

 

AT4 Forum Fav 👍

Tyger Auto Underseat Storage Box - Grab one through Amazon!

[Chopper_Man]

Here's the ones I used. Fit is fantastic. https://www.amazon.com/dp/B07KVKN9PZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2

 

[Cablebandit]

Thanks, those were the ones I had sitting in my cart.

The funny thing is I see all these posts about not having the center console organizer, but mine came with that. Of course since it's hard slippery plastic I need to replace it with one that will keep things from sliding around all over the place inside.

 

[gemarsh]

$70,000 truck and they can't include the rear plugs for the stake pockets!? Does anyone have any good suggestions for this 50 cent part? I've seen many 20 dollar versions on Amazon but since they all seem to be variations of the same Chinese part, are any of them better than the others. I mainly just want the thing not to fly out going down the interstate.

Leaving that stake pocket open was on purpose. It goes along with the footstep in the bumper as a hand hold. Which also explains why gm used some goofy square hole that no 2x4 fits!

I don't know when, maybe when gm cheapened up the box using plastic rub rails, but on old school trucks, all six stake pockets were open.

I can tell you if'n you haul a steer to the butcher, you better use a horse trailer, cause that bed isn't going to hold up!

 

[hdrolling]

Yeah I use it as a hand hold as well, the grab handle is only on one side so using the holes works great. Even with a bed cover installed.

 

[MarshVegas716]

Here's the ones I used. Fit is fantastic. https://www.amazon.com/dp/B07KVKN9PZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2

+2

 

[Dale J]

Got mine from Amazon too.

 

[Rick S]

$70,000 truck and they can't include the rear plugs for the stake pockets!? Does anyone have any good suggestions for this 50 cent part? I've seen many 20 dollar versions on Amazon but since they all seem to be variations of the same Chinese part, are any of them better than the others. I mainly just want the thing not to fly out going down the interstate.

These are the ones I got. I got the silicone ones. They are awesome and fit flush.

TOPINSTALL 2025 Stylish Bed Rail Stake Pocket Covers Compatible with 2019-2025 Silverado/Sierra 1500 and 2020-2024 2025 Chevy Silverado/GMC Sierra 2500HD 3500HD, Upgraded Truck Hole Caps Plugs-2PCS https://a.co/d/fKkYdd4

 

[Jorayr97]

I got these for both of my trucks, fit great and made in America.

https://a.co/d/96Ne5OW

 

[GregE]

These are the ones I got. I got the silicone ones. They are awesome and fit flush.

TOPINSTALL 2025 Stylish Bed Rail Stake Pocket Covers Compatible with 2019-2025 Silverado/Sierra 1500 and 2020-2024 2025 Chevy Silverado/GMC Sierra 2500HD 3500HD, Upgraded Truck Hole Caps Plugs-2PCS https://a.co/d/fKkYdd4

Thanks. Just ordered for my new truck. Thought they just didn't give me some.

 

[Don S]

I looked at several and bought a set on Amazon. They were hard plastic and didn't stay in well. I gave them to my son-in-law for his new truck. Instead, I bought these on Amazon that are silicone, much better fit.

Stake Bed Cover

 

[GregE]

I looked at several and bought a set on Amazon. They were hard plastic and didn't stay in well. I gave them to my son-in-law for his new truck. Instead, I bought these on Amazon that are silicone, much better fit.

Stake Bed Cover

That's a great price. I bought silicon too but more $ might have to return and get these.

 

[GregE]

I looked at several and bought a set on Amazon. They were hard plastic and didn't stay in well. I gave them to my son-in-law for his new truck. Instead, I bought these on Amazon that are silicone, much better fit.

Stake Bed Cover

Did you use the double sided stickers that came with them?

 

[Don S]

I did, but it made them nit seat as well. I pulled some of the tape off. They fit well enough without all the tape.