Trying to install a auto/stop eliminator on my 2022 refresh. The instructions are okay but I don't think is showing all the steps for removing the infotainment screen and control gauge cluster. I took off the (4) screws between the screen and gauge cluster but something is still holding the infotainment/control bezels. Anyone done this and are there any other screws? A guy from the gmaithority forum posted the information below but i don't understand it and couldn't locate any other screws. I want to be careful and not force anything.... I appreciate the help.
"The instructions posted will get you close as they start to repeat. You will need to pop the gauge cluster surround off and remove a screw on the top left of the radio screen. Then there are 2 screws in the top cubby behind the screen to remove (far outer screws). Then pull on the bottom of the screen to pop it out. The plug for the Start/Stop eliminator is on the driver side."
"The instructions posted will get you close as they start to repeat. You will need to pop the gauge cluster surround off and remove a screw on the top left of the radio screen. Then there are 2 screws in the top cubby behind the screen to remove (far outer screws). Then pull on the bottom of the screen to pop it out. The plug for the Start/Stop eliminator is on the driver side."