1500 AT4 aftermarket wheels and tires - what do you have?

[Regular Cab Duallies]

What aftermarket wheels and/or tires do y'all have on your 1500 AT4s? Post some pictures and info about your setup

 

AT4 Forum Fav 👍

Ironclad EXO Motor Impact Gloves - Grab a set through Amazon!

[Regular Cab Duallies]

2020 1500 AT4

Wheels: Method Mr305 18x9 -12 offset, 4.5 backspacing

Tires: 35/12.5R18 Nitto Ridge Grappler

Suspension: 4" BDS lift with adjustable FOX coilovers

"Needed minor plastic trimming and has a slight rub at full turn. As you can see from the pics this wheel and tire combo can be done No spacers, and the tires stick out over 1" from the fenders"

Now ideally you would have picture straight down the side as well as one right in front of the wheel.

This is not my truck, and all pictures as well as information came from:

2020 GMC Sierra 1500 Wheel Offset Aggressive > 1" Outside Fender Suspension Lift 4" | 1808831 | TrailBuilt Off-Road

This 2020 GMC Sierra 1500 4WD is running Method Mr305 18x9 -12 wheels and Nitto Ridge Grappler 12.5x35 tires with BDS Suspension 4" Suspension Lift.

www.trailbuiltoffroad.com

 

[Riverdog]

I've posted this before but should probably consolidate in this thread

2021 AT4 1500 6.2L 10 speed
stock suspension
mud flap bracket delete
minor rubbing on the right front when going fast and hitting a bump (very minor)

Black Rhino Sentinel 20" +12 offset
Nitto Ridge Grappler 295/60r20

 

[Regular Cab Duallies]

2021 1500 AT4

Wheels: Bronze Method Mr305 20x10 -18 offset, 4.79 backspacing

Tires: 33/11.5R20 Nitto Ridge Grappler

Suspension: 1.75" Zone leveling kit with Zone upper control arms

"Zone off-road 1.75 leveling kit. With upper control arms. Trimmed the triangular corner piece in front of the front wheels on the front bumper with a oscillating saw. Sanded. Removed metal bracket behind fender liner. Drilled a hole in factory mud flap. Used mud flap bracket bolt to pull mud flap back. Installed zone UCAs and leveling kit."

Still not my rig, info came from here:

2021 GMC Sierra 1500 with 20x10 -18 Method Mr305 and 33/11.5R20 Nitto Ridge Grappler and Leveling Kit | Custom Offsets

Check out this 2021 GMC Sierra 1500 4WD running Method Mr305 20x10 -18 wheels and Nitto Ridge Grappler 11.5x33 tires with a Zone Leveling Kit.

www.customwheeloffset.com

 

[TDCAT41]

2021 1500 AT4

Wheels: Bronze Method Mr305 20x10 -18 offset, 4.79 backspacing

Tires: 33/11.5r20 Nitto Ridge Grappler

Suspension: 1.75" Zone leveling kit with Zone upper control arms

"Zone off-road 1.75 leveling kit. With upper control arms. Trimmed the triangular corner piece in front of the front wheels on the front bumper with a oscillating saw. Sanded. Removed metal bracket behind fender liner. Drilled a hole in factory mud flap. Used mud flap bracket bolt to pull mud flap back. Installed zone UCAs and leveling kit."

View attachment 659
View attachment 660
View attachment 661

Still not my rig, info came from here:

2021 GMC Sierra 1500 with 20x10 -18 Method Mr305 and 33/11.5R20 Nitto Ridge Grappler and Leveling Kit | Custom Offsets

Check out this 2021 GMC Sierra 1500 4WD running Method Mr305 20x10 -18 wheels and Nitto Ridge Grappler 11.5x33 tires with a Zone Leveling Kit.

www.customwheeloffset.com

Looks great. Any pictures from the front?
Like to see if/how much they stick out past body.

 

[Regular Cab Duallies]

Looks great. Any pictures from the front?
Like to see if/how much they stick out past body.

Sorry man, I couldn't find any more pictures of this rig (specifically the one you requested) . However, after inspecting the first picture, below is what I estimate you would see of the tire if the picture was taken perfectly down the (right) side of the vehicle. The body would end at somewhere in the blue line, and everything else to the right of that would be visible (looking down the drivers side).

Sorry I'm not able to be more helpful.

 

[Regular Cab Duallies]

Looks great. Any pictures from the front?
Like to see if/how much they stick out past body.

Found a rig (AT4!) with the same wheel and tire seize, as well as with a leveling kit! It has slightly more useful pictures.

2019 Sierra 1500 AT4

Wheels: Fuel Contra 20x10 -18 offset in Gloss Black with Milled Spoke Edges with a Candy Blue Tint, 4.79 inch backspacing

Tires: 33/11.5R20 Nitto Ridge Grappler

Suspension: 2" (?) Rough Country leveling kit

"Trimmed air dam/valance, no rubbing. Aggressive stance with over one inch sticking out of the fender"

@TDCAT41 take a look at the photos below this. They might help you out get an idea of the stance. Keep in mind the front will usually stick out more than the rear.

Yet again, this isn't my rig. Info and pictures came from here:

2019 GMC Sierra 1500 with 20x10 -18 Fuel Contra and 33/11.5R20 Nitto Ridge Grappler and Leveling Kit | Custom Offsets

Check out this 2019 GMC Sierra 1500 4WD running Fuel Contra 20x10 -18 wheels and Nitto Ridge Grappler 11.5x33 tires with a Rough Country Leveling Kit.

www.customwheeloffset.com

 

[Regular Cab Duallies]

This is a sweet rig!

2021 Sierra 1500 AT4

Wheels: Fuel Ammo 18x9 -12/+1/+20 offset (not specified, those are the ones available for this wheel) in Matte Gunmetal Gray with a Black Simulated Beadlock, 4.53/5.04/5.790 inch backspacing

Tires: 35/12.5R18 Nitto Ridge Grappler

Suspension: 4" BDS suspension lift. Appears to be the standard lift, not the coilover conversion.

"Minor trimming to inner wheel well plastic, still has a slight rub at full turn. 1.5 inch spacers, front and rear. Aggressive stance, sticks over one inch out past the body"

Yet another rig that isn't mine, info and pictures came from here:

2021 GMC Sierra 1500 Wheel Offset Aggressive > 1" Outside Fender Suspension Lift 4" | 1824291 | TrailBuilt Off-Road

This 2021 GMC Sierra 1500 4WD is running Fuel Ammo 18x9 0 wheels and Nitto Ridge Grappler 12.5x35 tires with BDS Suspension 4" Suspension Lift.

www.trailbuiltoffroad.com

 

[Pb82 Ronin]

Subbing!

 

[Regular Cab Duallies]

Subbing!

Just wondering, not trying to be mean, but why do people put that? I have seen it tons on other forums, but have never asked.

 

[Pb82 Ronin]

It means I'm subscribing to the thread because I'm interested, but don't yet have much to contribute.

 

[Regular Cab Duallies]

It means I'm subscribing to the thread because I'm interested, but don't yet have much to contribute.

But what exactly do you mean by "subscribing to the thread"?

 

[Pb82 Ronin]

When you reply in a thread...you're "subscribed" to it. You receive notifications when things update, someone posts a reply, etc. "Subbing" is an abbreviation for subscribing.

 

[Regular Cab Duallies]

When you reply in a thread...you're "subscribed" to it. You receive notifications when things update, someone posts a reply, etc. "Subbing" is an abbreviation for subscribing.

Oh okay, thanks for explaining to me! You can also get notifications without replying to a thread, here are the instructions for that:

Underneath the title, to the right hand side, there is a button that says "Watch". Click on it, and it will allow you to confirm you want to watch the thread, as well as the ability to decide if you want to receive notifications or not:

Choose if you want to get emails for it or not, then hit "Watch". Now you will get notifications!

Also, if you ever decide you want to unwatch a thread for any reason, the "Watch" button will have been replaced with an "Unwatch" button, which you can use to unwatch a thread. It will also ask you to confirm that you want to unwatch it.

Hope that is helpful!

 

[Pb82 Ronin]

Not being rude...

But says the guy who didn't know what subbing meant. Been on forums for 20+ years...I know how they work, but I appreciate the refresher.